Replacement Circuit Board For A MaxxAir MaxxFan 4951KS RV Vent

Question

Question:

I am looking for a circuit board for a Maxxfan 4951KS w/ a S/N of 1810-4951ks-1799. My parts manager gave me a part number of 10-04751ks-v1.2 if that helps at all. I tried searching on the website but I couldnt seem to find it.

asked by: Brenda K

0

Expert Reply:

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents # MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

expert reply by: Kevin C

0

Answer 1

Since multiple MaxxAir Fans have the same features that you listed it's honestly best to first determine the exact model number you have before purchasing anything and end up not having it be compatible. I've listed below all the available…

view full answer...

Answer 2

Hello Randy, thanks for reaching out. I agree that replacing the circuit board and rain sensor will resolve the issue. We do have the circuit board you are looking for available as part #MA39FR. The rain sensor is part #MA34FR. A lot of times when we…

view full answer...

Answer 3

Companies like Reese and Lippert have found that there's too many variables for a sticker or fill line to accurately give you the best ride quality and have stopped placing them on their air ride pin boxes and instead recommend starting at 15-20…

view full answer...

Answer 4

I reached out to my contact at MaxxAir and she said that the correct printed circuit board for your MaxxAir model 4751KSV05 powered vent fan is the part #MA10A04751KS.

view full answer...

Answer 5

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…

view full answer...

Answer 6

You can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS to replace your damaged 10A04751ksz MaxxAir circuit board. This is a direct replacement.

view full answer...

Answer 7

After replacing The Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS, and the motor still does not open the lid you will need to replace the motor. The Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof…

view full answer...

Answer 8

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I don't…

view full answer...

Answer 9

Based on what you mentioned the correct replacement circuit board would be the part #MA10A04751KS.

view full answer...

Answer 10

Hi Dominic; thank you for providing that info and the picture. Your current pin box uses a 1621 bolt pattern. With a 14k GVWR and the Gen-Y formula GVWR x 0.22 = TW you need the 4.5k TW model as you said. These two pieces of information are all that…

view full answer...

Answer 11

Only certain B&W Companion 5th wheel trailer hitches are compatible with Sidewinder pin boxes like the RP61412. Basically if it is a Companion that mounts in the 4 pucks of a factory prep package then it can be used with a Sidewinder. But if the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Circuit Board For A MaxxAir MaxxFan 4951KS RV Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching