Fit of etrailer e93ZR Class III Hitch on 2021 Nissan Rogue Platinum

Question

Question:

Will the etrailer hitch fit my 2021 Rogue Platinum model?

asked by: Todd W

0

Expert Reply:

The etrailer brand # e93ZR Class III hitch fits all models of the 2021 Nissan Rogue, so it'll work great with your Platinum model.

If you'll be towing with the hitch, you'll also need a trailer wiring harness like part # TK76FR, a ball mount like part # D-28 and a hitch pin, part # PC3 and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch ball.

I've linked to the installation instructions for the hitch and the wiring harness I recommended.

expert reply by: Mike L

0

Answer 1

The shortest 2 inch hitch extender we have is the part #HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.

view full answer...

Answer 2

Swagman does not offer replacement keys for this particular anti-rattle hitch lock, you would need to replace entire lock with part #S64029 unfortunately.

view full answer...

Answer 3

The part #S64029 that you referenced takes a 22 mm or 3/4 inch wrench to tighten the bolt side of it. The same size wrench is used for the #S64031. The hitch pin of the Swagman Trailhead part #S63360 is also the same size. The #e98891 can be keyed…

view full answer...

Answer 4

Hey Mick! A hitch pin lock like the etrailer item #e98880 would be helpful in securing your bike rack from theft if you do not already have one. It will work great with the etrailer Hitch item #e93ZR that fits your 2021 Nissan Rogue. To attach the…

view full answer...

Answer 5

It sounds like you will need the Locking Anti-Rattle, Threaded Hitch Pin #S64029 for for your Rola bike rack. This anti-rattle bolt has the 12mm course thread pitch. It also has a lock with 2 keys included.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

We sure do Rob and congrats on the new SUV. To add a hitch to your 2026 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit for your Rogue and comes with all hardware necessary for installation. The crosstube mounts entirely…

view full answer...

Answer 12

Hello Noah, thanks for reaching out. You can absolutely still install a trailer hitch on a 2025 Nissan Rogue with the rear kick sensor. The problem is the hitch will limit the functionality of the sensor. In most cases the kick sensor will still work…

view full answer...

Fit of etrailer e93ZR Class III Hitch on 2021 Nissan Rogue Platinum

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching