What is Shortest Length of 2 inch Hitch Extender

Question

Question:

Please tell me what the shortest 2 hitch extender is that you carry.

asked by: Chuck

0

Expert Reply:

The shortest 2 inch hitch extender we have is the part # HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.

expert reply by: Jameson C

0

Answer 1

Hey Eric, we do have to recommend you stick with what Kuat recommends when using their bike racks so that you don't void any warranties. But with that said I am sure people have used hitch extenders like the RockyMounts part #RKY10011 in…

view full answer...

Answer 2

Hey Jimmy, My go-to hitch recommendation is the etrailer Trailer Hitch Receiver #e98856 because it has a matte black finish which will keep the hitch in better shape longer than the classic glossy black finish we see with the other hitch fits. The…

view full answer...

Answer 3

I do have a potential option for you, but we do not carry a 4" long extension for a 2" hitch. The shortest extension we carry is the Yakima #Y69VR which is a 7-1/4" extension. From there everything we have is 8" or longer. Please…

view full answer...

Answer 4

The RAS systems like #RAS4611 are widely considered to be the best suspension enhancement you can install on a truck towing a trailer. They provide the most stability, provide the most comfortable ride quality, and are adjustable in how much support…

view full answer...

Answer 5

When it comes to a cover for your Lippert Components Power Tongue Jack, #LC285318, you can use Vinyl Cover with Drawstrings, #JET-01. This cover was designed for use with the Stromberg Carlson Electric Jacks, which were manufactured by Lippert…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Kent! Your Alliance Avenue already has some great suspension components with the MORryde CRE3000 equalizers, wet bolt kit, and Rota-Flex pin box. I wouldn't replace any of those unless you're experiencing a specific problem. The next…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

What is Shortest Length of 2 inch Hitch Extender

Product Page this Question was Asked From

Continue Researching