DIY Install: etrailer Trailer Hitch Receiver on your 2023 Nissan Rogue Video

I would be happy to! To add a hitch to your 2024 Nissan Rogue, I recommend the etrailer item #e93ZR. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500…

Drilling is not required, and you will not need to trim or cut any part of the bumper fascia on your 2023 Nissan Rogue to install either the etrailer or Curt trailer hitches that fit. The hitches that fit are the following part numbers: - etrailer…

Hey Adam, 24-5/8" is a standard sizing for 2,000lb leaf springs so the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long #e69SR is what you need. It unfortunately doesn't look like we offer a slipper spring…

That hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch #C24HR which is much more recessed like you can see in the picture I attached. I could be wrong…

When comparing the Curt #C24HR, etrailer #e93ZR, and Draw-Tite #DT85MR there are very few differences. All three hitches have a 2" receiver and the same maximum gross towing weight of 3,500 lbs and tongue weight of 525 lbs. The Curt and etrailer…

The hands-free liftgate on your 2023 Nissan Rogue will still be functional after installing the etrailer Trailer Hitch Receiver #e93ZR. You'll need to kick your foot to either side of the 2 inch receiver, but it will still activate. I also wanted…

The least visible trailer hitch for a 2024 Nissan Rogue is the etrailer Trailer Hitch Receiver #e93ZR.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer Trailer Hitch Receiver #e93ZR is confirmed to fit your 2023 Nissan Rogue. I like the etrailer hitch because it has a matte black powder coating that helps keep scratches and scuffs less visible that you get from rocks and flying road…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Installation of the etrailer Trailer Hitch Receiver #e93ZR may limit the functionality of the hands free sensor on your 2021 Nissan Rogue but the feature will not be lost. This will be the case for any hitch installed on your vehicle. Once installed,…

The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…