Does 2020 Kia Telluride Come Pre-Wired for Trailer Wiring

Question

Question:

I saw your reply regarding all 2021 Tellurides having trailer wiring plug. Can you confirm the same for the 2020?

asked by: Tipton R

0

Expert Reply:

The 2020 and 2021 Kia Telluride trailer wiring setups are the exact same. So yes all of the 2020 Kia Telluride models come with trailer pre-wiring so the # CU94FR that you referenced would fit and work great.

expert reply by: Jameson C

0

Answer 1

Hey Joe, while I don't know what brake controller you have you should be able to unplug it from the back of the brake controller and that would accomplish what you are wanting. What brake controller do you have?

view full answer...

Answer 2

Yes, it will so long as your 2020 Telluride already has a 4-way connector like item #C59236 or item #CU94FR. The 7-Way RV Upgrade Kit item #ETBC7L requires a functional 4-way to connect to your Telluride. Please note that the 7-Way RV Upgrade Kit…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...

Answer 6

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 7

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 8

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 9

Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part #C94WR which is mostly hidden, has great towing capacities, and also is priced lower. For trailer wiring I would then recommend the part #CU94FR for a 4-way or the…

view full answer...

Answer 10

As you said, we typically recommend grounding directly to the vehicle battery when doing a hardwire install using the #ETBC7 install kit. From what I understand, the suggestion for using a chassis ground is mainly meant for vehicles with CAN bus…

view full answer...

Answer 11

I understand the reasoning behind this and I actually installed the first one that way and didn't get the results we wanted. It makes sense to save the expense of the wire and use the chassis. The reason you must run the wire full length is so…

view full answer...

Does 2020 Kia Telluride Come Pre-Wired for Trailer Wiring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching