T-One Vehicle Wiring Harness with 7-Way Trailer Connector Spec Review Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is not any added hardware required to install the Curt hitch that fits your 2022 Ford Ranger, which is the following part number: - Curt Trailer Hitch Receiver #C13417 Installation of the #C13417 on a '22 Ranger just requires removing the…

The Tekonsha #22124 wiring harness would plug inline at the point where your exisitng 4-pole plugs into the factory harness. Once installed, you will have a functional 7-way, and will still retain a functional 4-pole. If the trailer you're…

The Tekonsha wiring harness item #22124 for your 2021 Ford Ranger XLT uses a power lead because they feel like it's needed but the Curt harness item #C56431 will work just fine and eliminates that extra step during installation. I recommend using…

No sweat! You'll just need to install a 12-volt outlet kit, part #RM-9332. The socket would be located under the dash, so you can easily locate it to plug in the Patriot. The outlet would wire directly to the vehicle's battery. Each time you…

The Curt T-Connector Vehicle Wiring Harness part #C56431 is an excellent option for a 2019 Ford Ranger. It comes with a 7-way trailer connector so in order to add a 4-way as well while keeping the 7-way you'd need to replace the trailer connector…

The newer Ford trucks feature what's dubiously referred to as a 'smart' trailer connector. The connector won't send any power back on the 12-volt accessory circuit (which powers the Echo) until the vehicle is turned on, the…

It's the same harness for both. That's just how its categorized on our website. To add a 7-way to your 2023 Ford Ranger you will want the Curt T-Connector Vehicle Wiring Harness item #C56431. This custom-fit T-connector plugs into your…

Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item #C13417 on your 2023 Ford Ranger. It is the Shocker Hitch Air Cushioned Ball Mount item #SHK89VR. This cushioned ball mount has a 10,000 lbs capacity and comes with a…

Yes. The Curt #C56431 tees into the existing factory wiring and will leave your factory 4 way connected, so you'll still have the ability to use that for towing as well. I've linked the installation video of this harness for you to have a…

The backup lights wire you are looking for in the Curt 7-Way Harness, #C56431, is the Red wire. If you test that wire and find that it doesn't have any power, then you will want to check to make sure there is a 10 amp fuse in slot 34 in the…

The issue is almost certainly with the hitch cover that you are using after you installed with the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56431. A number of hitch covers have been known to wreak havoc with Ford trucks…