Recommended Blue Ox Plug-And-Play Tow Bar Wiring Kit For A 2017 Jeep Cherokee

Question

Question:

Recommended Plug-And-Play Tow Bar Wiring Kit For A 2017 Jeep Cherokee

asked by: Craig

0

Expert Reply:

The Blue Ox Tow Bar Wiring Kit Item # BLU84XR is the correct wiring harness for your 2017 Jeep Cherokee and features the plug and play design that will allow you to bypass splicing into the wiring to use your vehicle's tail lights to signal while flat towing.

expert reply by: Kevin C

0

Answer 1

You can absolutely do that! What you'll want, in that case, is to use the Blue Ox Base Plate Kit #BX1128 instead of the Roadmaster #RM-521440-5 base plate kit. Now you will be able to use the Blue Ox Ascent Non-Binding Tow Bar #BX4370 you…

view full answer...

Answer 2

The Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required on select Jeep Cherokee's in order to activate the electronic power steering (EPS) system while the vehicle is in tow mode. This part must be obtained from the dealer but…

view full answer...

Answer 3

The installation of the Roadmaster Nighthawk Tow Bar will not take much time at all, though I believe you are asking about the time for the entire flat tow set up for your 2017 Jeep Grand Cherokee. This will of course depend on who is doing the…

view full answer...

Answer 4

You are on the right track and everything you have so far is a great choice for flat towing your 2018 Jeep Grand Cherokee. The Blue Ox base plate kit part #BX1128 is a confirmed fit. I attached an install video for the kit for your installer to check…

view full answer...

Answer 5

No, you can't but I have a way to make your lights work with your current parts. You'll want to install the Roadmaster Universal Hy-Power Diode Wiring Kit item #RM-152 and item #RM-910030-7 if you need the 6-pin connector. Here are the rest…

view full answer...

Answer 6

According to my research, the 2019 Kia Soul can be flat-towed with all four wheels down if it has a manual transmission. However, I strongly recommend you confirm this with your local dealer as the owner's manual was not very clear on whether or…

view full answer...

Answer 7

I did some checking and it looks like your 2012 Chevy Captiva Sport is flat-towable behind your RV. You'll need to follow all outlined instructions for thits in the owners manual of the vehicle. First thing you need is a base plate kit installed…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Kirt, Congrats on the new car! To get your car safe to flat tow you'll need the following parts: Base-Plate #RM39FR Tow-Bar Adapter #RO64FR Lighting #RM-15267 Chargeline #RM-156-25 Air-Force One Vehicle Side #SM99209 and Hose #SM99666 (if you…

view full answer...

Recommended Blue Ox Plug-And-Play Tow Bar Wiring Kit For A 2017 Jeep Cherokee

Continue Researching