Could Curt Hitch Head C16590 Fit Ram M30 OEM Hitch Base/Legs  

Hello Tim, thanks for reaching out. We do carry the Curt 16032 brackets, we just have them under our own unique part number. Take a look at the following: - Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package - 30,000 lbs #C25JR

Brandon, the Curt OEM 5th Wheel Hitch Legs #C25JR is not going to work with either the A25 or A30 because it is designed for the Curt PowerRide 5th Wheel Trailer Hitch #C22ER. Instead, for your Curt A25 or A30 you're going to need the Replacement…

Hay Darin, thanks for reaching out! Yes, all of the Ford puck systems from the factory have the same dimensions between the puck attachments so something like the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package #BWRVK3300 will…

The Mopar M30 5th Wheel Hitch is the same as the Curt A30 5th Wheel Trailer Hitch part #C64BR which the Replacement Rear Anchors part #C48UR fit so yes, they will work on the Mopar M30 5th Wheel Hitch. If you need the front as well that would be the…

The Curt A30 part #C66HR does fit the same base rails as the A25 you have now and are considering selling. So the A30 would easily replace what you have and offer more weight capacity.

They are all different. The Curt A20 legs are part #C16906, the A25 is part #C16907, and the A30 does not have a set of industry standard legs since it's currently only for OEM rail kits.

These 5th wheel hitches are extremely similar with only a couple differences. Both of them fit the factory puck systems in the 2024 Chevy Silverado 3500. I have linked a diagram below from Curt that lists the similarities. The main difference between…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…