Looking For Curt 16032 Curt OEM 5th-Wheel Hitch Legs

Question

Question:

Do you have the Curt 16032 brackets? I already have the head, just need the brackets

asked by: Tim H

0

Expert Reply:

Hello Tim, thanks for reaching out. We do carry the Curt 16032 brackets, we just have them under our own unique part number. Take a look at the following:

- Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package - 30,000 lbs # C25JR

expert reply by: Jesse M

0

Curt OEM 5th-Wheel Hitch Legs
(click to enlarge)

Jesse M.

9/8/2025

Hey Tim, did the Curt 5th-Wheel Hitch Legs work out for your setup? I'm curious to know because it could help others in a similar situation.

Tim H.

9/8/2025

@JesseM Yes it did. Perfect fit. Has worked well with over 2K miles pulling 12K dry weight 5th wheel.

Jesse M.

9/9/2025

@TimH Awesome! Glad to hear it worked out. Come back anytime you need anything!

Answer 1

Yes, there is. To use a Curt Q20 item #C16130 in the Ford factory puck system you will need the Curt OEM 5th-Wheel Hitch Legs item #C16017. These legs will replace the ones your currently have and allow you to install your Q20 hitch in the Ford…

view full answer...

Answer 2

The Taskmaster Provider ST235/80R16 Radial Trailer Tire - Load Range E #TTWTRTM2358016E has a load rating of 3,520 lbs at 80 psi and has a speed rating of up to 81 mph. The Kenda Karrier ST235/80R16 Radial Trailer Tire - Load Range E #AM10248 has a…

view full answer...

Answer 3

Hi Dave! We actually have the Replacement Head Mounting Hardware for Curt 5th Wheel Hitches #C35UR that is exactly what you are needing. It includes qty.4 of the following: M14 45mm Bolt M14 Flat Washer M14 Split Washer M14 Nyloc Nut You will also…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Looking For Curt 16032 Curt OEM 5th-Wheel Hitch Legs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching