Will Replacement Anchors for Curt 5th Wheel Hitch Work with Mopar M30

Question

Question:

Will these handles work on the Mopar M30 hitch?

asked by: Eric M

0

Expert Reply:

The Mopar M30 5th Wheel Hitch is the same as the Curt A30 5th Wheel Trailer Hitch part # C64BR which the Replacement Rear Anchors part # C48UR fit so yes, they will work on the Mopar M30 5th Wheel Hitch. If you need the front as well that would be the Replacement Front Anchor part # C68UR.

expert reply by: Conner L

0

Answer 1

Hi Timothy, yes, the Curt part #C25JR is exactly what you need to replace the base legs on your Curt A30, which is the same hitch as the Mopar M30, and fit it to the Ford OEM fifth wheel prep package. According to Curt, the C25JR replaces the base on…

view full answer...

Answer 2

Hay Darin, thanks for reaching out! Yes, all of the Ford puck systems from the factory have the same dimensions between the puck attachments so something like the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package #BWRVK3300 will…

view full answer...

Answer 3

Curt makes the M30 fifth wheel hitch so yes the Curt A30 hitch head part #C16590 would fit its legs/base.

view full answer...

Answer 4

Hello Tim, thanks for reaching out. We do carry the Curt 16032 brackets, we just have them under our own unique part number. Take a look at the following: - Curt OEM 5th-Wheel Hitch Legs for Ford Super Duty Towing Prep Package - 30,000 lbs #C25JR

view full answer...

Answer 5

Brandon, the Curt OEM 5th Wheel Hitch Legs #C25JR is not going to work with either the A25 or A30 because it is designed for the Curt PowerRide 5th Wheel Trailer Hitch #C22ER. Instead, for your Curt A25 or A30 you're going to need the Replacement…

view full answer...

Answer 6

These 5th wheel hitches are extremely similar with only a couple differences. Both of them fit the factory puck systems in the 2024 Chevy Silverado 3500. I have linked a diagram below from Curt that lists the similarities. The main difference between…

view full answer...

Answer 7

They are all different. The Curt A20 legs are part #C16906, the A25 is part #C16907, and the A30 does not have a set of industry standard legs since it's currently only for OEM rail kits.

view full answer...

Answer 8

The Curt A30 part #C66HR does fit the same base rails as the A25 you have now and are considering selling. So the A30 would easily replace what you have and offer more weight capacity.

view full answer...

Answer 9

The 30K Ram 5th wheel hitch is a Curt A30 #C64BR with the Ram branding. You will be able to Remove the Head #C16590 from the Ram Legs #C65WR and install the ISR Base Legs #C16907 to fit in your ISR Rails. Do be sure to check the weight rating of your…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Replacement Anchors for Curt 5th Wheel Hitch Work with Mopar M30

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching