Recommended Replacement Bearing for a Detail K2 Trailer
Updated 06/21/2021 | Published 06/19/2021
Products Featured in This Question
Question:
Hello, I need a replacement bearing for a dk2 trailer. My sku begins with L1WU. We can’t figure it out. Thank you!
asked by: Tammy P
Expert Reply:
From what I could find out about the axles on the Detail K2 Trailers, like the # K2MMT5X7, they use the inner and outer bearing 30205. This has an inner diameter .985 inches. Unfortunately, we do not have a bearing that corresponds to this size. This isn't a very common bearing, but is out there.
What I suggest doing is replacing the axle with something that uses a more common bearing combination. The Dexter # 20545I-ST-60-15 will include bearings and hubs, but will measure 60 inches from hub face to hub face and 48 inches from the center of one spring seat to the center of the other spring seat. This is also a round axle, and from what I could find all the Detail K2 axles look to be square, so you will also need the U-Bolt Kit # APUBR-10.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit for Detail K2 Mighty Multi A-Frame Utility Trailer
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Search Results: dk2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Parts for 1987 Trailer
- Article: Spring Towing Readiness Checklist
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Article: Most Popular Wheel Bearings
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Q&A: Inside Diameter of Spindle Washer Included With etrailer Hub Bearing Kit
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Inner Member for Old A-60 on 2004 Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: RV-Mounted vs Vehicle-Mounted Tow Bars
- Article: How to Accurately Measure Trailer Leaf Springs