Fit of Curt Class III C13395 Trailer Hitch on 2021 Jeep Cherokee

Question

Question:

c13395 Will this work for me. Can I get it sooner than July 28?

asked by: Jerry O

0

Expert Reply:

The Curt Class III # C13395 is a fit for your 2021 Jeep Cherokee as long as it isn't a Trailhawk model.

If you are planning on towing you will also need a wiring harness item # C56406 and a ball mount kit item # C45534.

expert reply by: Mike L

0

Answer 1

Sorry about the confusion. The Curt #C13398 and #C13171 and the etrailer brand #e73ZR would all fit the 2019 Jeep Cherokee Trailhawk. Of the various options, a top choice would be the etrailer #e73ZR because once installed it would be the most…

view full answer...

Answer 2

The Curt #C13395 and etrailer #e73ZR are in fact nearly identical. However, what sets the etrailer hitch apart is the matte black powder coat finish. This gives it more of an OEM appearance for a sharp look on your 2022 Jeep Cherokee and is also the…

view full answer...

Answer 3

While there is one hitch for your 2021 Jeep Cherokee Trailhawk that exits through the bumper, the #e73ZR does not, as the receiver will be below the bumper of your Jeep. The only option for a hitch that protrudes the bumper of your Cherokee Trailhawk…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C13395 is confirmed to fit your 2022 Jeep Cherokee Trailhawk. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C13395 will fit your 2020 Jeep Cherokee Trailhawk. Be sure to check the instructions linked below for the specific bolts that need to be removed and reused that are specific to the Trailhawk. If you are planning on…

view full answer...

Answer 6

When installing a trailer hitch on your 2019 Jeep Cherokee Trailhawk The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13395 will work. The hitch has a bolt-on installation, and has a gloss black powder coat finish over the…

view full answer...

Answer 7

Thanks for the pictures! The ground clearance of the etrailer Hitch item #e73ZR on a 2019 Jeep Cherokee is right at 9-1/2" to the bottom of the safety chain loops. This dimension will vary depending on passenger/cargo load, tire condition (brand…

view full answer...

Answer 8

The best hitch for your 2023 Jeep Cherokee Trailhawk is going to be the etrailer Hitch item #e73ZR. This hitch is custom fit and bolts to Jeep with included hardware. It fits both the Trailhawk and non Trailhawk models. I really like the etrailer…

view full answer...

Answer 9

The reason you are running into difficulty installing the Draw-Tite Max-Frame Trailer Hitch Receiver #75838 is it is only a confirmed fit for the Trailhawk models and will not work on your 2014 Jeep Cherokee Limited. The correct hitch for your 2014…

view full answer...

Answer 10

The Curt Class III hitch, part #C13395 fits all models of the 2019-2021 Jeep Cherokee, including the Trailhawk. What you're referring to is kind of a quirk of our fit guide, it lists this way because some of the other hitches offered for the…

view full answer...

Answer 11

Though the safety chain loops on the Draw-Tite #DT28MR will be recessed due to where the hitch will sit, they are not inaccessible by any means. This is designed to mimic the look of a factory hitch so it will fit in the area the factory hitch will.…

view full answer...

Answer 12

For a 2019 Jeep Cherokee Latitude, I'd recommend going with the Curt Class III hitch, part #C13395. I prefer this hitch to the #C13171 you'd looked at because once installed, it's almost completely hidden behind the Cherokee's bumper…

view full answer...

Fit of Curt Class III C13395 Trailer Hitch on 2021 Jeep Cherokee

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching