Is there Locks on the Thule TracRac SR Sliding Truck Bed Ladder Rack?

Question

Question:

Do the uprights lock onto the rails or is there a way to keep someone from loosening them and just sliding them off?

asked by: Jeff B

0

Expert Reply:

The upright mounts on the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-508 do not come with locking mechanisms. However, we do sell the Locking TracKnobs for Thule TracRac G2 or SR Sliding Ladder Rack # TH25700 to deter theft of the ladder rack.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Matej, If you're not comfortable using Happijac tie downs then you can absolutely use the TorkLift Camper Tie-Downs #TLC2205 for the front, and #TLC3209 for the rear. These are American made, custom fit to your vehicle so it'll bolt right up…

view full answer...

Answer 6

Hey George, welcome back! To get that high of a capacity out of an extension, you'll need the Gen-Y Hitch Receiver Hitch Extender item #GY89SR. This works with a 2" hitch receiver and extends the hitch pin hole out 14". It has a 10,000…

view full answer...

Answer 7

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Is there Locks on the Thule TracRac SR Sliding Truck Bed Ladder Rack?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching