Determining If Vesper Steel Dual Trailer Wheel MX89FR Fits 2013 Itasca 25B

Updated 05/11/2021 | Published 05/09/2021

Question:

Hi- I have a 2013 RV Itasca 25B on a Ford E-350 chassis. I want a spare tire that will work on either the front steering wheels or the rear duallys. Will this wheel fit the bill? Thanks!

asked by: Ken M

Expert Reply:

It is possible that the Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.88" Pilot - Silver # MX89FR will work on your 2013 Itasca 25B built on the Ford E-350 chassis, but you will need to confirm the bolt pattern of your current wheels and the offset as I was unable to find any information on the wheels your vehicle uses.

Using the included help article will tell you exactly what bolt pattern you have by walking you through how to measure your current wheels.

For offset there should be a stamping on the inside of your wheel the will say the offset. If there is no marking you will need to measure from the hub face of the wheel to the center of the wheel to determine the offset. As long as your current wheels have the same +5.35" offset the # MX89FR will work as a spare for either the front or rear of your 25B dually.

I included a video of the # MX89FR for you to take a look at.

expert reply by: Samuel C