How To Wire Up the Optronics LED Trailer License Plate Light

Question

Question:

Hi I have enduralight ADR48/00 Application ADR13/00 Plu 578357. What do the red and black wires connect too? I have brown and white on the trailer. So does red connect to brown?

asked by: Kristy D

0

Expert Reply:

In regards to the Optronics LED Trailer License Plate Light part # LPL55CB, the black wire is for power and the white wire is a ground. The black wire will be hooked up to the running light circuit which is usually a brown wire. If you have a ground circuit nearby you could tap into this or just use a screw and ground it straight to metal.

expert reply by: Conner L

0

Answer 1

Hello Mike, Thanks so much for the picture, it’s super helpful! When installing the Optronics Mini Trailer License Plate Light #LP31CB, you’ll just need to connect one wire to your power source or running light circuit, and the other wire to a solid…

view full answer...

Answer 2

Hardware is not included for the Optronics LED Trailer License Plate Light w/ Bracket - 5 Diodes - Clear Lens Item #LPL55CB, but you can make a trip to the local hardware store and pick up some bolts and nuts to secure the license plate, light…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hello Andy! Yes, I would be happy to put together a flat tow package for your 2019 GMC Canyon. Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-523182-5 - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

How To Wire Up the Optronics LED Trailer License Plate Light

Product Page this Question was Asked From

Continue Researching