Does Bumper of 2020 Honda Odyssey Need to be Trimmed to Install Draw-Tite Trailer Hitch C64NR

Question

Question:

Im confused as to wether or not you have to trim the bumper to complete the installation

asked by: Steve C

0

Expert Reply:

There is some trimming of the fascia required when installing on your 2020 Honda Odyssey when you are installing the Curt Trailer Hitch Receiver # C64NR.

The only trimming required is a 1.75" x4" section of the bottom appearance panel, which is separate from the actual bumper; trimming this section is needed for access to the frame and won't affect your Odyssey at all.

I also wanted to mention, if you do plan on towing with your 2020 Odyssey and need a trailer wiring harness, the correct part is the T-One Vehicle Wiring Harness # 118753.

I have added links below to video installs of both of those parts on a '20 Odyssey for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Hi Stephen; it is the hitch and not the wiring that causes interference with the hands free liftgate. You will still be able to use this feature with the Curt Trailer Hitch Receiver #C64NR. Even if there is some interference, you won't loose the…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver part #C64NR and etrailer Trailer Hitch Receiver part #e98855 are both fits for a 2019 Honda Odyssey (All Models). I recommend the Curt Trailer Hitch Receiver because it will be more hidden once installed. In regard…

view full answer...

Answer 3

Hey Linden. It entirely depends on what you're doing with your hitch. If you're planning on only hauling accessories like a cargo carrier or a bike rack you only need a hitch. For your 2025 Honda Odyssey, I recommend our etrailer Hitch item…

view full answer...

Answer 4

I would be happy to! To add a hitch to your 2024 Honda Odyssey, I recommend the Curt item #C64NR. This hitch is custom fit and bolts to your van with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing…

view full answer...

Answer 5

The main differences between the two 2 inch hitches that fit your 2019 Honda Odyssey is that the #e98855 is a bit easier to install whereas the #C64NR is much less visible since only the hitch opening hangs below the rear bumper which also greatly…

view full answer...

Answer 6

For your 2022 Honda Odyssey the EcoHitch Hidden Trailer Hitch Receiver #306-X7372 and Curt #C64NR are very similar as they have roughly the same installation difficulty, both have a hidden crosstube meaning once installed only the receiver itself is…

view full answer...

Answer 7

Hi Mike! Do you want a completely hidden hitch or one where only the receiver is visible? The Curt #C64NR you looked at has a concealed cross tube so you will only see the receiver hanging down at the rear. The Hidden Hitch by Draw-Tite #DT76GR will…

view full answer...

Answer 8

The EcoHitch #306-X7372 and the Curt #C64NR both have identical weight capacities (3500 lbs towing/525 lbs tongue weight), would install in the same manner, would be visually very similar and the receiver tubes would sit at the same spot in relation…

view full answer...

Answer 9

The Malone Dual Purpose Hitch Receiver, part #MPG544 will work as a rise for your hitch. However, you'll reduce the tongue weight capacity of the hitch by 50%, dropping your total capacity from 525 pounds with the Curt Class III, part #C64NR down…

view full answer...

Answer 10

Hey Kp; they pretty much are identical as you observed. Aside from the price, the only real difference here is that Curt tends to add a thicker powder coat finish to their hitches. It is for that reason that I would choose the #C64NR over the #76170…

view full answer...

Answer 11

Hey Nick, thanks for reaching out! I highly recommend going with the Curt Trailer Hitch Receiver #C64NR for your 2020 Honda Odyssey because it has the hidden crosstube and a 2" receiver. The hidden crosstube gives you better ground clearance…

view full answer...

Answer 12

I have the perfect solution for your 2022 Honda Odyssey! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT76GR has a crosstube that installs up and out of the way and then you can remove the locked receiver when you aren't using the hitch.…

view full answer...

Does Bumper of 2020 Honda Odyssey Need to be Trimmed to Install Draw-Tite Trailer Hitch C64NR

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching