Comparing EcoHitch and Curt C64NR Trailer Hitches For 2022 Honda Odyssey

Question

Question:

I am looking for a trailer hitch for my 2022 Honda Odyssey and am torn between the EcoHitch and C64NR hidden hitches. Which do you recommend?

asked by: Conrad G

0

Expert Reply:

For your 2022 Honda Odyssey the EcoHitch Hidden Trailer Hitch Receiver # 306-X7372 and Curt # C64NR are very similar as they have roughly the same installation difficulty, both have a hidden crosstube meaning once installed only the receiver itself is visible, and both have the same 525lb tongue weight rating and 3,500lb trailer weight rating. They are both made in the USA.

If you will be towing a trailer with your Odyssey you will also need a vehicle wiring harness # 118781, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900.

I included install videos of the recommended products for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Hey Kp; they pretty much are identical as you observed. Aside from the price, the only real difference here is that Curt tends to add a thicker powder coat finish to their hitches. It is for that reason that I would choose the #C64NR over the #76170…

view full answer...

Answer 2

Hi Stephen; it is the hitch and not the wiring that causes interference with the hands free liftgate. You will still be able to use this feature with the Curt Trailer Hitch Receiver #C64NR. Even if there is some interference, you won't loose the…

view full answer...

Answer 3

I would be happy to! To add a hitch to your 2024 Honda Odyssey, I recommend the Curt item #C64NR. This hitch is custom fit and bolts to your van with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing…

view full answer...

Answer 4

Hey Linden. It entirely depends on what you're doing with your hitch. If you're planning on only hauling accessories like a cargo carrier or a bike rack you only need a hitch. For your 2025 Honda Odyssey, I recommend our etrailer Hitch item…

view full answer...

Answer 5

The main differences between the two 2 inch hitches that fit your 2019 Honda Odyssey is that the #e98855 is a bit easier to install whereas the #C64NR is much less visible since only the hitch opening hangs below the rear bumper which also greatly…

view full answer...

Answer 6

There is some trimming of the fascia required when installing on your 2020 Honda Odyssey when you are installing the Curt Trailer Hitch Receiver #C64NR. The only trimming required is a 1.75" x4" section of the bottom appearance panel, which…

view full answer...

Answer 7

The etrailer Trailer Hitch Receiver part #C64NR and etrailer Trailer Hitch Receiver part #e98855 are both fits for a 2019 Honda Odyssey (All Models). I recommend the Curt Trailer Hitch Receiver because it will be more hidden once installed. In regard…

view full answer...

Answer 8

For your 2022 Honda Odyssey I recommend going with the Draw-Tite #76170 over the Curt #C13370 due to the Draw-Tite hitch having a hidden crosstube meaning once installed the only visible portion of the hitch will be the receiver as shown in the…

view full answer...

Answer 9

All of the etrailer and Curt Class III trailer hitches that fit your 2020 Honda Odyssey either meet or exceed the max towing capacity for your vehicle, so it really boils down to the design of the trailer hitch and what you plan on using it for. I…

view full answer...

Answer 10

The Curt Class III trailer hitch for your Pathfinder, part #C13126 would utilize nuts that are welded up into the frame member. The conical toothed washers used in the installation do a good job of maintaining the torque applied to the bolt during…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C12175 in and of itself is a solid choice for your 2023 Honda Odyssey, but it does have a smaller receiver and the crosstube hangs under the bumper of your van and reduces ground clearance so I actually recommend…

view full answer...

Answer 12

So what you need is the correct ball mount rise/drop that will allow your trailer to be towed level. If you did need a ball mount with a 6 inch rise we have the #C45090 though. For hitch balls you would want part #63845 for a 2 inch ball or #63847…

view full answer...

Comparing EcoHitch and Curt C64NR Trailer Hitches For 2022 Honda Odyssey

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching