Result: 58301

Hello Thomas, thanks for reaching out, and for your recent orders. The 4-flat plug should simply slide in from the back of the #18144 Mounting Bracket. There is really no secret trick to it. Take a look at the video I linked below. If you fast…

Thank you for the photos! It looks like Marvel used to be associated with Atwood and they went out of business a while ago. We have some similar coupler styles but I'm not seeing that any of our repair kits having the same design as your coupler…

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

Thanks for your recent purchases of the etrailer Trailer Hitch Receiver #e44AR and T-One Wiring Harness #118809 for your 2023 Honda Passport! In order to secure the 4-Way near the hitch receiver I recommend picking up the Mounting Brackets #18136 and…

Hello Robert, Congrats on the new car! We do have a wiring harness that is available for pre-order the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector - Preorder #C48RV. If you don't want to wait for that one to be released,…

I believe we can narrow this down based on the information you are referencing. However, the best way to be sure is to measure your existing bearings or spindle with a digital caliper like the #PTW80157. It looks like one bearing is stamped with…

Hello Jeff. I am sorry to say that we do not offer a replacement hardware kit for the Blue Ox Base Plate #BX1139. it may be worth reaching out directly to Blue Ox to see if they can provide hardware, otherwise you will need to source it locally. The…

I don't have on off-the shelf item that provide a solution for your license plate, but I can tell you how to put something together that would work pretty well for you. I'd recommend you use a license plate bracket/lamp like part #LPL55CB.…

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

We sure can! The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

Thanks for all of the info on the axle you have on your trailer. Since you have a Dexter 5,200 lb axle with a 6 lug bolt pattern the correct hub/drum you need is the Dexter #K08-201-98.

Yes, you can use part #C92CR with part #18140 to attach the 6-way trailer connector to your Blue Ox Base Plate Kit. The no drill bracket wraps around the bar via the band clamp and then the other mounting brackets attaches to that. This will be the…