What Are the Mounting Dimensions on the Low Profile LED Flood Light

Question

Question:

Will this light be a exact replacement, what i mean by this is, does it have the same mounting for a typical oval exterior light

asked by: Angel

0

Expert Reply:

There really isn't going to be a "typical" size for an oval exterior light, but if your light is overall 4.33" long and has 3.75" between the mounting holes then this light will work for you.

expert reply by: Erik B

0

dimensions
(click to enlarge)

Answer 1

I recommend mounting the Low Profile LED Flood Light #OPT64FR on the upper frame of your trailer. This light is 2" tall and will broadcast the light down at a 45 degree angle. The housings are made of aluminum to help protect the light from…

view full answer...

Answer 2

The color of the light that the Low Profile LED Flood Light part #OPT64FR puts out is a bluish white which is very common for LEDs. For a warmer light that would work great the Omega LED RV Porch Light part #328-007-30SCPE which puts out a warmer…

view full answer...

Answer 3

Yes, since the Low Profile LED Flood Light #OPT64FR puts out 1,000 lumens it would easily light up a door/ramp like you mentioned.

view full answer...

Answer 4

It sounds like you're needing a light like the Great White LED Trailer Back Up Light #PE44AR. This has a 7" diameter and a simple 2-wire connection. Since it's a surface mount light you only need to make a small hole for the wiring…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

What Are the Mounting Dimensions on the Low Profile LED Flood Light

Product Page this Question was Asked From

Continue Researching