How To Install 4-way Trailer Connector In 2021 Toyota Highlander XLE Without Factory Tow Package

Updated 03/29/2021 | Published 03/26/2021

Products Featured in This Question

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1896)

$87.94

Hook Probe Circuit Tester

(66)

$13.42

Question:

Do you have a recommendation of where to splice the taillight wiring on a 2021 Toyota Highlander XLE?

asked by: Michael P

Expert Reply:

To install the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 you were looking at for your 2021 Toyota Highlander XLE I recommend removing the trim on the inside of the hatch and mounting the converter on the driver side of your Highlander, and using a circuit tester like # PTW2993 to identify the correct wires to splice in to.

Another option is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK99FR which is confirmed to fit your Highlander without the tow package and will plug into the existing 10-pin connector located on the driver side of your vehicle behind the rear bumper. This is the option I recommend as it does not involve splicing.

I included videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C