Locking Pins for Lock N Roll Couplers
Updated 02/16/2021 | Published 02/12/2021
Products Featured in This Question
Question:
Do you have a 1/2” diameter, 4” length, locking hitch pin for a LocNRoll hitch?
asked by: Bradley P
Expert Reply:
I called Lock N Roll and they said that if you want to use locking hitch pins, then they recommend the 2 pc set from Fastway # FA86-00-3660. The hitch receiver lock diameter is 5/8" and is 6-3/4" long. The locking coupler pin is 1/2" diameter and 7" long. This set is nice since they're keyed alike, making it easier for you to use them, while providing two points of security, making it harder for thieves.
Just note that these locks are a deterrent for opportunistic theft. If you want to really lock down while your trailer is parked, Lock N Roll recommends using a supplementary form of security on the trailer itself like a Tire and Wheel Lock # WI490.
Product Page this Question was Asked From
Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Steel
- Fits 2 Inch Hitch
- Bent Pin
- Flush Pin
- 3-5/8 Inch Span
- 3-7/8 Inch Span
- Fastway
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Does etrailer Axle with Pre Greased Hubs Require Putting More Grease In the Hub
- Video: Remove and Reinstall a Trailer Hub Review
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Shop: Replacement Pin for Lock N Roll Vehicle-Side Trailer Hitch Latching Plates
- Shop: Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series Ball Mounts
- Video: etrailer Easy Grease Trailer Hub and Drum Assembly Installation - 2019 Grand Design Reflection 150 F
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Q&A: Is There a Special Tool Or Trick To Installing Trailer Grease Cap On Trailer Hub?
- Shop: Suspension Enhancement
- Shop: Timbren Suspension Enhancement System - Rear Axle
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Video: Fifth Wheel Towing Made Simple with Daniel
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
on Hitch Pins and Clips
