Video Transcript for Review of InfiniteRule Trailer Hitch Lock - Hitch Locks Lock N Roll Articulating Hitch - IR59FR

Hi, everybody, Andy here with etrailer. Let's take a quick look at these InfiniteRule Hitch Locks for your Lock-N-Roll Articulating Hitch. Now, these heavy-duty stainless steel hitch locks are built to keep your Lock-N-Roll Articulating Hitch secure and protected. As you can see there on your screen, these are designed for your 2-inch receiver and these flush-style locks are going to replace the standard pins for a cleaner, theft-resistant setup. So, you're gonna get exactly what you see here. Two locks with two keys.

Everything's keyed like, so one key is going to run the entire operation here. The shorter one is going to secure the articulating coupler to your 2-inch trailer hitch receiver, and then the longer one is going to connect the trailer-end coupler to the articulating coupler. Both are made from rust-resistant stainless steel, very durable. I'm gonna take one of these keys and unlock the shorter one here. If you notice we have this tethered cap here, that's gonna keep that keyway clean.

So, I'm gonna take one of these keys, insert it in the key lock here, and then I'm gonna turn counterclockwise like I'm loosening a bolt, so I'll just keep turning until that loosens and comes apart. And if you notice here, there is an O-ring that's going to keep the internal components free from dirt, grime, moisture, things like that. And then when you're ready to lock this up, you'll just connect the head to the lock and then tighten it down by turning clockwise like you're tightening the screw. And once it's tight, you're just going to line the key up with the nearest set of hash marks around the key ring there, and that's going to allow you to release the key from the keyway. So, very easy to use.

So, again, everything is keyed alike for convenience, and these locks have a working load limit of 7,000 pounds. Let me give you some measurements beginning with the short lock first. So, looking at the overall length, end to end, looks like we're sitting right at 5 1/4 inches long, and probably the more important measurement for you is the inside pin length, inside to inside, also known as the span. Looks like right at 2 5/8 inches. The diameter of the short pin is 5/8 of an inch.

And then looking at the overall length of the longer pin, end to end, looks like 6 3/8 inches long. And then the inside length, looks like 3 3/4 inches. And then this is going to have a 1/2-inch diameter on this longer lock. Now, if you happen to have any other questions, whether it's about this set or anything else that we carry here at etrailer, don't hesitate to reach out to us. We wanna make sure that you're getting exactly what you need. Well, again, they call me Andy. Thank you for joining me.