Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I went out to measure the Lock N Roll Articulating Trailer Hitch for 2" Receivers - Vehicle Side #336VS501 and found the distance from the center of the hitch pin hole to the back of the latching mechanism is about 6", the length from theā¦
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'mā¦
view full answer...I like the compatibility of the Ark Articulating Off-Road Coupler item #AR44FR over the Lock N Roll Articulating Channel Tongue Trailer Coupler item #336TS528. The Ark is compatible with any vehicle utilizing a standard 2" ball. The maximumā¦
view full answer...The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like youā¦
view full answer...The Fogatti InstaShower 8 Plus RV Tankless Water Heater #FG97FR does not include the door, it is just the tankless heater unit. If you are also looking for a door, I have them listed below as there are a few sizes offered. I also included the ākitāā¦
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")ā¦
view full answer...In order to choose the correct Lock N Roll Articulating Trailer Hitch you'll need to measure from the ground to the center of the trailer hitch on the vehicle and then from the ground to the top of the frame on the trailer and subtract 1" -ā¦
view full answer...The Timbren Trailer Suspension Enhancement System for Underslung Axles #T92MR is 5-1/4" tall. Timbren recommends The spring be in constant contact with the frame at all times. So ideally you will want exactly 5-1/4" from your axle tube toā¦
view full answer...Rather than change the coupler, the easiest option is to change the size of the ball ON YOUR BALL mount. If your coupler currently uses a 1-7/8 inch ball and your towing vehicle has a hitch and ball mount with a 2 inch ball, you can use anā¦
view full answer...I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a fewā¦
view full answer...Hello Shayne, There is not a smaller or 1-2 way adjustable version of the Demco 5-Position Adjustable Channel Bracket #DM13867-52.
view full answer...I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.
view full answer...Related Searches
Filter Your Search
Contact and Help