Hitch Clearance On A 1996 GMC Yukon With Roll Pan

Updated 01/26/2021 | Published 01/23/2021

Question:

Do you have any hitches that will fit a 1996 GMC Yukon with a roll pan?

asked by: Donald J

Expert Reply:

If you were to get the Curt Class IV Hitch Receiver # C14029 it may fit your 1996 GMC Yukon with a roll pan but to be sure, here are some measurements. From the mounting plates to hitch receiver top (height) it's 2-1/2 inches and from the bottom of the hitch receiver (Height) it's 5-1/4 inches. From the receiver end to the closest mounting hole (length) it's 7 inches and there is 17-1/2 inch width from center of mounting hole to center of the receiver.

On a stock 1998 Yukon, from the top of the receiver tube to the ground you'll have about 18-1/4 inches. From the center of the hitch pin to the edge of the factory bumper it will be about 2 inches. If that will work for your Yukon it is a super easy installation. I've included a video for you to see how easy it really is.

expert reply by: Adam E