Recommended Hub and Drum Assembly To Replace Redline HD84546BX
Updated 01/11/2021 | Published 01/07/2021
Products Featured in This Question
Question:
Can you cross this trailer part # to your drum HD84546BX this is a Trailer parts pro number. Thanks for your help
asked by: Kenton S
Expert Reply:
Absolutely!
The HD84546BX you mentioned is a 10"x2-1/4" hub and drum assembly with a 5 on 4.5" bolt pattern for a 3500lb axle. This hub uses inner bearing # L68149, outer bearing # L44649, and grease seal # RG06-050.
While we do not have this exact hub and drum assembly we do offer the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K which uses the same inner bearing, outer bearing, and grease seal and will be an exact replacement. This assembly includes the required bearings, races, grease seal, grease cap, and lug nuts.
If you also need the replacement brake assemblies you can use the Electric Trailer Brake Kit # AKEBRK-35-SA and Mounting Hardware # BRKH10B.
I included videos for all of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hd84546bx
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs for 2,700 lb Axle
- Video: What to Know About the Trailer Hub Assembly
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Search Results: washer
- Shop: Washer For 1" Spindle
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Search Results: marine wheel bearing grease
- Search Results: wheel bearing grease
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)