Replacement Hub for Dexter 8-248
Updated 01/09/2021 | Published 01/07/2021
Products Featured in This Question
Question:
I am looking for eplacement for a Dexter 8-248 6C02. Please advise what the replacement hub would be and what the bearing kit would be. Thank You
asked by: Paul E
Expert Reply:
The Dexter 8-248 is a 3500 lb capacity idler hub that uses the L68149 inner and L44649 outer wheel bearing. It's available with 5 on 4-1/2 inch bolt pattern as # 84545BX or # 845475UC1 for a 5 on 4-3/4 bolt pattern. A galvanized version with a 5 on 4-1/2 inch bolt pattern is available as part # AKIHUB-545-35-G-EZ-K.
The hubs would include the inner and outer bearings and races, the grease seal, the dust cap and the lug nuts.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: k08~248~1g
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub and Bearings for Fish Right River Master Jet Boat Trailer With Dexter 8-248 Hubs
- Search Results: dexter hub 8 248
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Q&A: Pre-Greased Hub Replacement for 8-248 Dexter 3,500 lb Hub with 5 on 5-1/2 Bolt Pattern
- Q&A: Trailer Hub Replacement for Dexter 8-248 With 5 on 5 inch Bolt Pattern
- Q&A: Will Dexter 8-248 Dexter Hub Replace Reliable R1001 Hub
- Q&A: What Spindle Does the Dexter 8-248-05 Hub Fit
- Q&A: Grease Cap for Dexter 8-248 Hub Assembly
- Q&A: Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs