Replacing Dexter 8-248 Trailer Hub Fitment
Updated 03/19/2021 | Published 03/16/2021
Products Featured in This Question
Question:
I am currently looking at replacing my Dexter 8-248 trailer hub. Is your Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 Item # DX98XR the correct replacement? My current one is 5 on 4.5. Thank you
asked by: Michael Q
Expert Reply:
Yes, the Dexter Trailer Idler Hub Assembly # 84545UC1-EZ is the correct kit assuming you do have EZ lube spindles. This kit comes preinstalled with the races and lug studs. New bearings, seal, nut, grease cap and lug nuts are included.
If you do not have EZ Lube spindles than Dexter Trailer Idler Hub Assembly # 84545BX is correct for you. It is identical to the other kit except for this is for non EZ lube axles. You can add Bearing Buddy Bearing Protectors # BB1980A-SS to make your bearings last longer by giving you a grease fitting. This makes lubing the bearings a much faster and simpler process.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: dexter hub 8 248
- Search Results: k08~248~1g
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" - 3.5K
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Is There a Replacement Seal for 10-40 with Double Lip?
- Q&A: Dexter Hub Replacement for Hub Marked 8-248
- Q&A: What is The Replacement for Dexter 8-248 Idler Hub
- Q&A: Replacement Hub Solution for Dexter 8-248
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Bearing and Seal Kit for a Dexter 8-248 Idler Hub
- Q&A: I Need to Replace My Hub that has 8-248 Printed on It