Trailer Wiring Harness Installation Location on a 2010 Lexus RX 350 with Factory Tow Package

Question

Question:

I am not sure if I have the towing package or not. Where does this plug in? For example, is it under the rear fascia? I have a 2010 Lexus RX350.

asked by: Paul

0

Expert Reply:

The connection point for trailer wiring harness # 56083 is located behind the rear bumper, on the driver side. I have included a picture and a link to the instructions that show this for you.

That connection point may be there even if the vehicle does not have the factory tow package. The easiest way to determine how the vehicle is equipped is to call a dealer service department and have them run the VIN through their system. They can tell you if you have the tow package or not.

If you do not have the tow package then you will need to use # 118478. I have linked a video and instructions for it as well.

expert reply by: Michael H

0

click to enlarge

Answer 1

I recommend picking up the etrailer Trailer Hitch Receive #e22TR for your 2015 Lexus RX 350 because it features a hidden crosstube and a matte black finish so you get a great looking hitch receiver that is going to do a great job at resisting rust…

view full answer...

Answer 2

The connector for the #118252 is located behind the rear bumper of the vehicle, just a bit left of the rear bumper centerline. The photo I produced will show the location. Before purchasing the #118252, confirm the presence of the connector. You…

view full answer...

Answer 3

Unfortunately, the Hollywood Racks is not a fit for your RX 350. Instead, as long as you do not have a spoiler, I can recommend the Saris Bones EX 3 Bike Rack #SA803 to be mounted to your trunk. If you do have the rear spoiler you would need to add a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 6

Hey Jonah, for your 2020 Lexus RX 350 F Sport, you can use the Draw-Tite Max-Frame Trailer Hitch Receiver #75540. This hitch has a 4,500 lb capacity, a 675 lb tongue weight capacity, and a bolt on design with the included hardware. If you plan on…

view full answer...

Answer 7

Hello Beth, Wow, that is a REALLY NICE bike!! I'm so glad you reached out. We definitely have a rack that will work for you, and you're absolutely right to be concerned about compatibility with the Thule Verse Bike Rack for 2 Bikes - 2"…

view full answer...

Answer 8

Hey Patrick, I checked out the OEM hitch for your 2024 Subaru Outback and it's trailer wiring bracket looks exactly like the type of bracket that the 7-way of the #ETBC7L is designed to work with so it would work as-is. Are you planning on…

view full answer...

Answer 9

I'm happy to help you get your RX 350 ready for pulling your new camping trailer and I wish you many good times in the future. Starting with a hitch, I recommend the USA-made etrailer Class III hitch #e94AR for its simple no-drill installation…

view full answer...

Answer 10

For the Curt T-Connector Vehicle Wiring Harness #C56217 on your 2021 Lexus RX 350L the connectors will be located in a different spot. The 10 pin connector should be located on the passenger side just below the taillight. The 4 pin connector will be…

view full answer...

Trailer Wiring Harness Installation Location on a 2010 Lexus RX 350 with Factory Tow Package

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching