Stabilizer Bar For HappiJac Tie-Down - 2004 Dodge Ram 3500 Dually

Question

Question:

hello, Im looking at the Happijac camper tie down brackets for my 2004 Dodge 2004 3500 dually https://www.etrailer.com/Camper-Tie-Downs/Dodge/Ram+Pickup/2004/LC182908-182928.html?VehicleID=20041898335#exp-productdetails=.why-etrailer please confirm if this comes with the stabilizer bar # 182928 thank you

asked by: Dave B

0

Expert Reply:

The HappiJac system you describe # LC182908-182928 does indeed include one stabilizer bar # LC182928

For the best experience with your truck camper, I'd also recommend purchasing Qwik-Load turnbuckles # LC182895 as well as swing-out hinges # LC182496 to assist you with clearance over the wheel well of your dually.

expert reply by: Aaron A

0

Answer 1

The only other extension option we carry besides the Torklift SuperTruss extender that does not cut your tongue weight in half is an extra long ball mount. Traditional extensions such as part #C45796 cut the tongue weight capacity of the hitch on the…

view full answer...

Answer 2

Hey Jim, thanks for reaching out! The DeeZee Custom-Fit Truck Bed Mat #DZ28GJ will fit your 2024 Ram 3500 as long as it's an 8' bed, the TorkLift Tie Downs #TL75FV will fit the truck as well, and then the TorkLift Locking FastGun Turnbuckles…

view full answer...

Answer 3

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

view full answer...

Answer 4

To install the Replacement Anchor Bolt for HappiJac Truck #LC182852 for the HappiJac Truck-Mounted Camper Tie-Downs #LC182861 follow the instructions below and use the reference picture attached: 1. You'll start by marking a center point from…

view full answer...

Answer 5

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 6

Yes, the Torklift tie downs part #TLD4102 and #TLD3109 are the correct fit for your 2009 Dodge Ram 2500 short bed with the factory hitch and step tubes!

view full answer...

Answer 7

You are correct. When you set up the brake controller for the first time, you set the power to 6 with no boost, drive the vehicle and trailer on a flat surface at 25 mph, then fully apply the manual override. Adjust the power as needed to reach a…

view full answer...

Answer 8

Hello Tony, thanks for reaching out. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is what you will need for tandem 7K axles. You will also need new U-bolts part #APUBR-8. As far as converting to disc brakes,…

view full answer...

Answer 9

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Stabilizer Bar For HappiJac Tie-Down - 2004 Dodge Ram 3500 Dually

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching