Recommended Euro Style Drawbar with 7 Rise

Updated 11/19/2020 | Published 11/17/2020

Products Featured in This Question

Curt Class II Euro Style Drawbar with 1-7/8" Ball - 5-1/8" Rise - 3,500 lbs

(386)

$47.17

1-7/8" Hitch Ball - 3/4" Diameter x 3-3/8" Long Shank - Chrome - 2,000 lbs

(2620)

$19.09

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2620)

$18.47

Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K

(323)

$57.92

Question:

I need a eurostyle draw bar that fits into 1 1/4 inch receiver. It has to have a 7inch rise. It can be a 1 7/8ths ball or 2 inch ball. Can you help me to find this. None have that tall of a rise.

asked by: Rodney L

Expert Reply:

I may have a solution for you, but we don't have any Euro style drawbars with a 7" rise and after doing some digging I'm not quite sure they are available that tall . With that said, you may be able to use the Curt # C45591 which has a 5-1/8" rise. This would be the closest solution to the 7" you're looking for.

If you were willing to use a non-Euro style draw bar, you could use the Brophy # BM96, which has a 5" rise from the top of the shank to the top of the ball mount platform. You could then use any hitch ball with a 3/4" shank, like the # 19254 (1-7/8" ball) or # 19258 (2" ball). This would put you close to 7" once you add in the ball and would likely provide you with a much better configuration to keep the trailer relatively level when towing.

I've linked some review videos of a few of these parts to check out.