Hitch Recommendation for a 2004 Toyota Tundra SR5

Question

Question:

will the E-3S fit the 2004 Toyota Tundra SR5 Access cab bumper without any drilling ....

asked by: Davis

0

Expert Reply:

In order to determine whether or not the Curt Specialty Trailer Hitches # E-3S would fit on your 2004 Toyota Tundra without drilling you will need to check out the picture I attached that shows the dimensions of the mounting holes for this hitch and compare them to your bumper.

You should note that while this hitch is rated for 500 lb of tongue weight and 5,000 lbs of gross trailer weight you will still need to avoid exceeding the weight capacity of the bumper of your vehicle.

If you are looking for a hitch that I can guarantee does not need any drilling check out the Draw-Tite # 75105. This hitch bolts right to the frame. Check out the installation instructions and video I attached also.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The #E-3S hitch from Curt is designed to be compatible with bolt holes found in the bottom of the license plate well of a standard truck step bumper. The flat portion of the hitch measures 11 x 4 inches with an overall width of 14 inches. The oblong…

view full answer...

Answer 2

The Curt bumper hitch you referenced, part #E-3S is a multi-fit application that will fit many different vehicles. The hitch is compatible with a standard step bumper, so if your Tacoma has that type of bumper it should work. I have provided a photo…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 10

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 11

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Hitch Recommendation for a 2004 Toyota Tundra SR5

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching