Does etrailer Hitch e94AR for 2019 Lexus RX 350 Interfere with Hands Free Liftgate Sensor

Question

Question:

Does receiver 75540 interfere with kick sensor on a 2019 rx350?

asked by: Mike

0

Expert Reply:

The etrailer hitch part # e9AR might interfere with the hands free liftgate sensor of your 2019 Lexus RX 350 but you'd just need to kick to either side of the hitch opening for the sensor to still function and open the rear door.

expert reply by: Jameson C

0

Answer 1

Both the 2012 and 2014 model years of the Lexus RX 350 are part of the vehicle's third generation, spanning 2008 through 2015 model years. Despite this, wiring harness fits are not shared. My contact at Tow Ready suggested you check for a wiring…

view full answer...

Answer 2

The trailer hitch I recommend for your 2018 Lexus RX 350 is the etrailer Class III Trailer Hitch #e94AR because it has great towing capacities, installs easily, and because it has a concealed cross tube which means it won't be quite as visible as…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Does etrailer Hitch e94AR for 2019 Lexus RX 350 Interfere with Hands Free Liftgate Sensor

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching