Can Air Lift for 2006 GMC 1500 be Installed on 2005 GMC 2500

Question

Question:

Hello I have the air lift #57272 on 06 1500 Chevy and just recently got a new truck and the air lift #57275 fits the new truck 05gmc 2500hd. It looks all the same other than the mounting hardware. Is it possible to buy the just the hardware I need or do I have to buy a new kit. Thanks.

asked by: Michael G

0

Expert Reply:

You will need to get an all new kit to obtain all of the pieces necessary to install the Air Lift LoadLifter 5000 Air Helper Springs # AL57275 on your 2005 GMC Sierra 2500.

I do recommend upgrading, however, to the Firestone Ride-Rite Air Helper Springs # F2250.

The Ride-Rite are the best option for air bags for yout 2005 GMC Sierra 2500 because they are made with four layers of reinforced rubber, which is a thicker, more reliable construction than the two layers of the Air Lift. This means they are the strongest, most durable air bags on the market and the best way to support the suspension of your truck.

expert reply by: Kyle S

0

Answer 1

The Air Lift suspension enhancement kit spring part #AL84201 that you referenced is a replacement spring and would not be an entire kit like you would need for your 2002 Chevy Silverado 3500 dually. For that you would want the part #AL57275 as it is…

view full answer...

Answer 2

Compressors are not included with air springs because not everyone wants to use them so they are available separately. For your 2006 Chevy Silverado, if you have a 1500HD or 1500LD the correct part is the Air Lift LoadLifter 5000 Air Helper Springs…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

view full answer...

Answer 9

Hello Dustin, To mount the TecNiq Mini Side Marker Light - Amber - 3/4" - Grommet Mount - 9" Wire #TN22XR, you’ll need to drill a 3/4-inch diameter hole. The rubber grommet is designed to press-fit into this standard hole size, allowing the…

view full answer...

Answer 10

Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…

view full answer...

Answer 11

Hi Randy; that part number corresponds with the OEM Chill Cube. At this time, there are no heat strips available from Furrion. They have said they are developing one, but it has been over a year with no word on an ETA. The only option for heat on a…

view full answer...

Answer 12

Yes you can. The brakes have to be changed out because they receive the "power" different ways, but since the hub and drum assembly only does one job you can use the same one. Just be sure that your electric brakes match the same size as…

view full answer...

Can Air Lift for 2006 GMC 1500 be Installed on 2005 GMC 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching