Can I Change Out Longer Hangars and Short Equalizers for Longer Ones to Gain Fender Clearance
Updated 06/08/2020 | Published 06/04/2020 >
Products Featured in This Question
Question:
we have a old boat trailer that had 4 leaf 23 1/2inch double eye springs on a 3.5k axle. We were only able to get a 25inch Springs. To adjust the distance we went from a 8inch equalizer to a 6. that gives us a 1 1/2inch difference which we are adjusting by moving the hangers by 1/2 that. my question is if i use longer hanger will it adjust the clearance difference for the tires under the fenders. My thoughts are yes. What can you tell me on this?
asked by: Marie
Expert Reply:
Since you have only moved things ever so slightly using a longer hanger like the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall part # E4139 will give you the desired effect and give you the clearance you need. You will want to use one at each connection point so at the end of each spring and above the equalizer.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Article: Trailer Lighting Requirements
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Video: Front Hanger for 2" Wide Slipper Springs Feature Review
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Front Hanger for 2" Wide Slipper Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Shop: Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Search Results: shackles
- Search Results: trailer leaf springs
- Q&A: 4-1/4 Inch Tall Hanger Needed for 1-3/4 Inch Wide Double Eye Leaf Springs
- Q&A: Hanger Compatibility For Bolt-On Application On 2016 Tracker Trailer
- Q&A: Can Front and Rear Trailer Suspension Hangers be the Same Height with Off-Level Leaf Springs
- Q&A: Recommended Ways To Raise Height Of Small 4 X 8 utility Trailer
- Q&A: Picking Out the Correct Leaf Spring and Spring Hanger Replacements for a Homemade 6x8 Flat Trailer
- Q&A: How to Determine Hub Face to Hub Face Dimension for Picking out Replacement Trailer Axle
- Q&A: Can All Three Leaf Spring Hangers Be the Same Length On a Tandem Axle Trailer
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer jack
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern

