How To Find Replacement Idler Hub for Load-Rite Trailer with 2,700 Lb Axle
Updated 05/01/2020 | Published 04/30/2020
Question:
I would like to replace the hub assembly on my 1988 load-rite boat trailer. Here is the info I have. Model-these were the only #’s I could get I don’t know if there were any that preceded them 82200V. Axle 2700lbs. Tires 15”. 5 holes 5” across 23/4” hole I took those measurements with the are zero’s so if that doesn’t work change them to O’s.I’d would’ve sent a pic except the cover is on the boat and it is heavy rain . We’re under a flood watch.
asked by: William R
Expert Reply:
The most likely replacement trailer hub we have available for a 2,700 lb axle is the CE Smith Trailer Idler Hub Assembly part # CE13315. This hub uses L44649 bearings which have an inner diameter of 1.063" and a 10-9 grease seal which has an inner diameter of 1.250". In order to confirm this is correct you will need to verify this as I don't have a way to look up what you have now.
In regards to the bolt pattern, this will be the standard 5 on 4-1/2". I have attached an article that shows the proper way to measure this but if this is not what you have, you'll need to convert using a combo from the list below.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Hitch
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Determining Correct Replacement Hub For Karavan Single Jet Ski Trailer W/ Single Axle and 13 Wheels
- Q&A: Replacement Idler Hub for Continental Boat Trailer
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: Recommended Replacement Hub For Boat Trailer With 1-1/16" Straight Spindles and 5 on 4-1/2" Wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles
- Q&A: Should I Use Bias Or Radial Tires On My Utility Trailer?
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Shop: Towing Mirrors
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Suspension Enhancement
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer jack
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
