Does Curt Hitch # C15703 Fit 2002 Chevy Silverado 2500HD Short Bed

Question

Question:

Thank you. I want to order curt C15703 but I need three additional items, one is a detailed item. I need a locking ball mount pin, a 2.5” to 2.0” reducer sleeve and I need a 7 point bracket on the hitch for my 7 point electrical connection. Will this be available to order on line?

asked by: Bill M

0

Expert Reply:

Yes, the Curt Class V 2.5 inch hitch part # C15703 is a confirmed fit for your 2002 Chevy Silverado 2500HD short bed.

expert reply by: Jameson C

0

Bill M.

4/29/2020

Thank you. I want to order curt C15703 but I need three additional items, one is a detailed item. I need a locking ball mount pin, a 2.5” to 2.0” reducer sleeve and I need a 7 point bracket on the hitch for my 7 point electrical connection. Will this be available to order on line?

Jameson C.

4/29/2020

The recommended reducer sleeve is the Curt # C45405, for a locking hitch pin you'd want the # C23519, and then for a 7-way bracket you'd want the #18159 for an easy solution.

Answer 1

Alright so I still don't know if you have no hitch, a factory hitch, or an aftermarket hitch. An extended hitch isn't really a thing but there are extenders that can be added to your existing hitch. I'll cover both possibilities just to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 8

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 9

Hey Ross, the B and W Turnoverball #BWGNRK1067 wasn't designed to fit under a flat bed so there isn't an alternate set of measurements I can recommend. Are you sure it would clear under the flat bed? Normally we have to recommend the…

view full answer...

Answer 10

Hey Mary, thanks for reaching out. We do have a hitch for your 2005 Chevy 2500 HD that is up to the task. Here is what I recommend: - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15703 This is the strongest hitch…

view full answer...

Answer 11

Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…

view full answer...

Answer 12

In regards to the Curt Trailer Hitch Receiver part #C15302 which is a fit for a 2001 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed, there are only two factory weld nuts in the frame which get reused, they are the two closest to the bumper. The other…

view full answer...

Does Curt Hitch # C15703 Fit 2002 Chevy Silverado 2500HD Short Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching