Will the Replacement 2" and 2-5/16" Dual-Sided Ball C45923 Fit the Curt Pintle Hook C45908

Question

Question:

Vehicle: 2019 Ford F-250 Super Duty Does part C45923 fit into C45908. I would like to buy the latter with the pintle hitch, but also need to have the ball set up, Was wanting to confirm that all of these parts were interchangeable and worked together.

asked by: Yuri

0

Expert Reply:

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part # C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part # C45908.

expert reply by: Conner L

0

Answer 1

I do have options for you but there is not a pintle hook adapter for the B&W Tow & Stow 3-Ball Mount part #BWTS20048B so the only way to obtain a pintle hook with the Tow & Stow feature is to purchase the B&W Tow & Stow Pintle…

view full answer...

Answer 2

I checked with Curt who confirmed you can replace the 2 5/16 inch ball with a 2 inch ball #C48820 as needed with the Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908. If you prefer the Convert-A-Ball option like you…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Good question, Steven. Thanks for asking! Yes, you'll need the Furrion 7-Way Vehicle Power Adapter #FR87PR for your Haloview cameras to function properly. The adapter provides constant 12 volt power, bypassing the truck's pulse-width…

view full answer...

Answer 11

Hello Adam, we meet again! I have two options for a lock that fits your Gen-Y Hitch Gooseneck Pin Box #GY38FR. The first is the InfiniteRule Lock for Gen-Y Hitch SnapLatches #IR48FR. This runs through that hole on the back of the latch to secure it,…

view full answer...

Answer 12

Hey Garret, I would definitely go with what Equal-I-zer recommended with the part #EQ37120ET which would be the correct rated system for your 2019 Heritage Glen 282RK. You are correct in that if you go with a system that is rated too high you will…

view full answer...

Will the Replacement 2" and 2-5/16" Dual-Sided Ball C45923 Fit the Curt Pintle Hook C45908

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching