Roof Vent Cover for Fan-Tastic Roof Vent DV1400

Question

Question:

Noticed info about models DF1400...my model number is DV1400. Will the FVU1400GRS install using the plastic integrated tabs and push pins on the unit? The U1500 model does not fit using the tabs.

asked by: Luther H

0

Expert Reply:

Since we don't have a specific roof vent cover from Fan-Tastic that fits your DV1400 your best option is a universal style roof vent cover part # MA00-933069 which will fit and work great on your setup.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 2

You need Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2, part #8-407-5UC3-EZ. This is the hub comes with the bearings, races, and seals. The drum that is compatible is the Dexter Electric Brake Assembly for…

view full answer...

Answer 3

I was able to find the owner's manual for your 2019 Jeep Cherokee Trailhawk and it does not mention requiring the Mopar Flat Tow Wiring Harness 68321424AB. I looked at the 2018 owner's manual and it does mention it there so you are correct…

view full answer...

Answer 4

The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Roof Vent Cover for Fan-Tastic Roof Vent DV1400

Featured Help Information

Miscellaneous Media

Continue Researching