Search: screws   >  

I pulled up a Coleman RV AC unit 7330-714 and it is a Mach style unit like what the part #MA00-325001 you referenced is designed to fit so this would be the correct replacement.

Hey John, thanks for reaching out! Aside from the Motor #LC132682 operating slower than the Motor #LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.

An electric A-frame tongue jack like #EJ-3527-BBX or #3370093500 that has a pre-wired 7-way plug will rely on the ground and +12V contacts within that plug to deliver operating power. Jacks may not function with less than 12 volts. Those contacts…

Sorry for the confusion Michael but the Draw Tite hitch part #76290 that you referenced is a confirmed fit for your 2024 Honda Passport Black Edition. To use the Curt Echo Mobile brake controller #C51180 you would need a functional 7-way at the…

The closest thing we have to an exact replacement is the 3" Wide Continuous Hinge #PLR843 you looked at. This is 84" long so that is the same as what you have now. The 1/4" difference on the width won't really…

Since you don't have the wiring harness on your previous RV water heater you most likely had an all propane powered unit. The Atwood RV Water Heater w/ Heat Exchange - Gas and Electric - Automatic Pilot - 8,800 Btu - 6 Gal #AT96163 is powered…

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…

If your vinyl trim track on your travel trailer is 1 inch wide from outside edge to outside edge you'd need 3/4 inch wide vinyl trim as the trim fits into the track. So for 100 feet of black 3/4 inch wide trim you'd want the…

I took a look at what we have, and the closest I was able to find to what you need is the: -3" Wide Continuous Hinge #PLR843. This is a continuous hinge that measures 7' (84") long, and is 3"wide. Consequently, we…

There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box #LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also…

The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part #LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.