Connecting Propane Grill and Griddle to Quick Disconnect on Trailer

Published 03/21/2020

Products Featured in This Question

MB Sturgis Propane Adapter Hose - Model 250 Quick-Disconnect x Disposable Cylinder Port - 10'

(1036)

$24.30

MB Sturgis Sturgi-Stay T-Fitting - Type 1 Valve - Quick Disconnect and Disposable Cylinder Ports

(39)

$65.05

Question:

I have two gas appliances, a Coleman Fold and Go grill with controller on regulator and a Blackstone 17” griddle with controller on griddle. I also have a low pressure quick disconnect on the trailer. I would like to convert both appliances to use the quick disconnect instead of the 1lb disposable bottles. What adaptors and hoses would I need? I’m thinking a 8’ to 12’ hose length. I attached photos of both regulators. I think I could eliminate the regulator on the Blackstone griddle and go straight to the quick disconnect.

asked by: Scott

Expert Reply:

If you're right about taking the regulator off of the Blackstone griddle then you can use part # 100476-120-MBS for a 10 foot hose that goes from the regulated quick disconnect on the trailer right to it.

The Coleman on the other hand is more difficult than that since the regulator can't be removed and, as you know, you can't run the gas through two regulators. The only thing we have that'll do it is adding a Tee right at your tanks using part # 103613-MBS and then using the same 10 foot hose I already mention, part # 100476-120-MBS, to go from there to the grill. This way it's only going through one regulator but it's not using the quick disconnect already on your trailer.

expert reply by: Charles S