bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Propane Fittings


  • Difference Between JR Products Automatic Changeover Propane Regulators & Camco Propane Regulator
  • The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information. The JR Products Automatic Changeover RV LP Gas Regulator # 37207-30395 is rated for 345,000 BTU per hour for the Service Cylinder and 260,000 BTU per hour for the reserve cylinder. The JR Products Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas...
    view full answer...

  • Hoses and Regulators Needed to Add Dual Tank Propane Setup to Trailer
  • I attached a picture that shows what the typical dual tank setup looks like with the accessories needed labeled. First thing you need is pig tails to go from the tanks to the regulator like the part # 100473-12. Then for a dual tank regulator with automatic changeover we have the part # 37207-30395 that each of the pigtails would connect to. Then for a 12 foot long extension hose that would plug into outlet of the regulator you'd want the part # 100040-144-MBS. From there you'd connect...
    view full answer...

  • Does The Greystone Portable Grill and Griddle Item # WAY34FR Have A Built In Regulator
  • The Greystone Outdoor RV Griddle and Grill Item # WAY34FR does not have a built in regulator. If you are running it off a single propane tank it will require one. I recommend the Camco Propane Hose w/ Shut-Off Valve Item # CAM57629. This hose and regulator are designed for your low pressure gas appliances running off a single tank.
    view full answer...

  • Recommended Longer Propane Pigtail for Cargo Area with Limited Clearance
  • Thank you for the picture! It looks like a longer pigtail hose is going to allow you to turn the cylinder enough to connect to your regulator, so I recommend using something like the MB Sturgis # 100833-24, which is 24" long. I've also linked our entire selection of pigtail hoses that have 1/4" male inverted flares and Type 1 connectors. Using a longer pigtail like this should allow you to connect your Camco Propane Cylinder Gas Gauge and Leak Detector # CAM59023 to the regulator and allow...
    view full answer...

  • Dual Propane Regulator Replacement for Older Trailer
  • It looks like what you have there are dual propane tanks, so a dual propane regulator will be needed. The age of the trailer doesn't matter so long as the fittings on the tanks are current. So what you need is the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525. For hoses you can use the 12 inch MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-12. To mount this regulator if needed, you can use the U-Post RV LP Gas Regulator...
    view full answer...

  • What Propane Regulator Should I Use as a Replacement on My 2015 Grand Design Reflection Model 303RLS
  • Both the Automatic Changeover RV LP Gas Regulator # 37207-30395 and the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525 will work as a replacement for your 2015 Grand Design Reflection Model #303RLS. The only difference in the two is the # 37207-30395 is a larger regulator which will allow you to run more appliances on propane. If you don't have many appliances drawing propane the # 37207-31525 will work.
    view full answer...

  • Which Mounting Bracket for JR Products Automatic Changeover Regulators
  • Yes. The U-Post RV LP Gas Regulator Bracket - Qty 1 # 37207-30405 is the correct mounting bracket for both the # 37207-31525 and # 37207-30395.
    view full answer...

  • Recommended Quick Connect Hose Compatible with Coleman 285 Grill
  • For your BBQ or Grill you will want the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' # 100476-120-MBS. This is the best option we have for the fitting on that grill. We also have 4 foot hose # 100476-48-MBS and the 6 foot hose # 100476-72-MBS.
    view full answer...

  • Replacement Pigtail Hose With 1/4" NPT Fitting For An Old Accuflex 454-04 1/4" NPT Pigtail
  • The MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" # 100833-15 is an 1/4" inverted flare tip and your regulator requires a standard 1/4" NPT fitting. You just need a pigtail like Propane Hose with Back Check - Type 1 x 1/4" Male NPT - 15" # 37207-30855. I've attached our help guide article below which goes over all of the different propane fitting types and offers a ton of additional information. I've also attached a picture of a NPT and MIF...
    view full answer...

  • Tee Fitting Needed to Connect Auxiliary 20 lb Tank to Propane System
  • What you need is a T-Fitting and auxiliary hose like what comes in the Kit # 103538-MBS, but your propane setup is a bit different than a normal RV so you'll need to get creative in how you're able to connect the T-Fitting. One end is a male POL connection, which will connect to your valve, while the other end has a female POL fitting. Then you have the 2 quick-disconnects and a hose that allows you to connect your 20 lb auxiliary tank. You can definitely use the T-Fitting # 103602-MBS...
    view full answer...

  • Adding A Propane Line From The RV Tank To An Appliance
  • For the splitter I recommend using the MB Sturgis Sturgi-Stay T-Fitting for POL Valve - 2 Model 250 Quick Disconnect Ports Item # 103537-MBS. From there you can use the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' Item # 100476-120-MBS with the MB Sturgis Disposable Propane Bottle Adapter Fitting Item # 204132-MBS on the 1 Inch-20 - Male fitting. If you need an extension you can use the Camco Replacement Propane Extension Hose - Male...
    view full answer...

  • Parts Needed to Hook Up to 100 lb Propane Tank on 2019 Grand Design Transcend RV
  • From what you described it sounds like you're needing the T-Fitting # 103602-MBS along with the Fill Hose # 100019-144 (for your small tank), the Tank Connector # 204037-MBS, and the 2-Stage Propane Regulator # 108221. Attached is a photo of what this setup looks like and below is a full list of the parts you'll need if all you currently have is the 100 lb tank: T-Fitting - # 103602-MBS Fill Hose - # 100019-144 Adapter Hose - # 100284-144-MBS (for an appliance like the Grill # FR51322) Tank...
    view full answer...

  • Parts Needed to Connect Wave Heater to Disposable Propane Cylinders
  • Either one would work for this application when paired with the # CAM57703; the # CAM59213 and # 204132-MBS are made by different manufacturers but perform the same function and are going to be high quality parts, but just look slightly different. You'll hook the # CAM57703 to your Wave heater and then connect one of those adapters to the black Type 1 fitting before attaching your disposable canister.
    view full answer...

  • Replacing a Winntech 6020 Propane Regulator
  • There are actually several options available to replace your Winntec 6020. A lot of propane regulators carry similar specs and are pretty comparable when it comes to quality. The Winntec 6020 regulator that you referenced is a low pressure regulator. My suggestion is to replace with the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator, # 37207-31525 that is rated for 262,500 Btu. But with the need to get something as soon as possible and your willingness to switch...
    view full answer...

  • Low Pressure 2-Stage Automatic Changeover Dual Tank Propane Regulator
  • For a low pressure automatic changeover regulator the best option is the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525. This uses the standard 1/4" FIF inlet x 3/8" FPT outlet, and to mount it I do recommend the U-Post RV LP Gas Regulator Bracket # 37207-30405. I have added links to video reviews of both parts for you to check out as well.
    view full answer...

  • Difference Between 3 JR Products Propane Regulators
  • Those three regulators are all very similar and essentially do the same thing but they're used on different propane setups. Part # 37207-30365 is a vertical regulator. Vertical regulators are commonly on propane systems on travel trailers or pop up trailers Part # 37207-30375 is a horizontal regulator that also has POL fitting inserted into it. Horizontal regulators are usually what you see on motorhome systems. The tanks on motorhomes, called ASME tanks, also use a POL connection...
    view full answer...

  • Recommended MB Sturgis Auto Changeover Regulator for Two 30 lb Tanks
  • The MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS reaches upwards of 500,000 Btu P/H and maintains pressure of 9 WC or above. This sounds like what you are seeking as the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525 is a similar item but only has a 262,500 Btu rating.
    view full answer...

  • Tee and Hose for Quick-Disconnecting Grill with 1 lb Propane Fitting
  • Although it isn't paired together in a kit, you can use the T-Fitting # 103537-MBS with the Quick-Disconnect Propane Hose # 100476-72-MBS for your application. This provides you with the quick-disconnect equivalent of the MB Sturgis Sturgi-Flow T-Fitting w/ Hose for POL Valve # 103608 that you referenced.
    view full answer...

  • Adding A Propane Gas Quick Connect Under Trailer
  • Than you for providing the photograph from under your trailer near the location you would like a propane quick disconnect hose installed. In the picture we see a iron pipe elbow attached to a fitting which is, male pipe thread on one side and male flare on the other. The flare side appears to connect to an appliance distribution line. I don't think you are supposed to try to Tee off a distribution line. Instead I would replace the elbow with a tee. I have attached a crude drawing I...
    view full answer...

  • Two-Stage Regulator With Automatic Changeover For Dual Propane Tanks
  • Thank you for the photo it was helpful, and what it shows is you do have the standard dual propane tank set up, so you can absolutely use the MB Sturgis regulator you asked about: - MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS Then if you'd also like new hoses what you can use are the MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare - 15 inches # 100575-15-MBS or 20 inches # 100575-20-MBS.
    view full answer...

  • Regulator Replacement for Winntec 6020 Jay Feather X17Z
  • Your Winntec 6020 regulator can easily be replaced by the Automatic Change Over RV Regulator from JR part # 37207-30395 as the BTU rating of this is compatible and the fitting sizes are the exact same.
    view full answer...

  • Connecting Propane Grill and Griddle to Quick Disconnect on Trailer
  • If you're right about taking the regulator off of the Blackstone griddle then you can use part # 100476-120-MBS for a 10 foot hose that goes from the regulated quick disconnect on the trailer right to it. The Coleman on the other hand is more difficult than that since the regulator can't be removed and, as you know, you can't run the gas through two regulators. The only thing we have that'll do it is adding a Tee right at your tanks using part # 103613-MBS and then using the same 10...
    view full answer...

  • Changeover/Regulator and Pigtail Harness or RV with Two 100 lb Propane Tanks
  • What you are looking for is a dual stage propane regulator with an automatic changeover like the JR Products Compact Low Pressure 2-Stage Automatic Changeover # 37207-31525. This connects to both of your tanks and automatically switches between them so that you can use both tanks without having to manually switch between them. For a 15 inch pigtail to connect from each tank to the regulator then we have the steel braided part # 100833-15 which will work great.
    view full answer...

  • Winntec 6020 RV Regulator Replacement Recommendation
  • As far as specs go the Automatic Changeover RV LP Gas Regulator # 37207-30395 is what you need to replace your Winntec 6020 regulator. When it comes to the mounting bolt pattern this regulator has a pattern of 1" horizontal x 3-1/4" vertical as you can see in the attached photo. If this doesn't match your current bracket then you can use the part # 37207-30355 to mount the regulator. Attached are some videos for you to check out.
    view full answer...

  • Winntec Model 6020 Propane Regulator Replacement
  • The Automatic Changeover RV LP Gas Regulator # 37207-30395 will work in place of the winntec model 6020 with no issues at all. With pigtails I suggest the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 20" # 100473-20-MBS.
    view full answer...

  • Replacement Regulator for JR Products High Pressure RV LP Gas Regulator 37207-30325
  • I have heard of this issue before with the High Pressure RV LP Gas Regulator part # 37207-30325. You do want to make sure the regulator is in the vertical position otherwise it's a possibility it could leak. If it is in the vertical position and still leaking, I recommend to replace it with MB Sturgis Single Stage Propane Regulator part # 108072 which is also a 30 PSI regulator with 1/4" female NPT outlet and inlet.
    view full answer...

  • Parts Needed to Connect 100 Lb Propane Tank to Water Heater
  • It sounds like what you need is a pigtail to go from the tank to a regulator, then from the regulator you'll need a supply hose that's long enough to reach and connect to the to inlet valve (manifold) on your food truck and that has the correct fitting. Below are the parts I recommend: 1. MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 1' # 100833-12 2. MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220 3. MB Sturgis...
    view full answer...

  • Automatic Changeover Regulator Plus Gas Gauge Recommendation For Dual 100lbs Propane Tanks
  • For your dual 100lb LP tanks, with your 30,000 BTU vent-less heater, I recommend using the Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks # CAM59005, which is rated for 160,000 BTU. For a gas gauge, we offer the Camco Propane Cylinder Gas Gauge # CAM59023; from here you can monitor the levels of your propane and detect leaks; finally you can connect your pigtails with # 100019-15.
    view full answer...

  • Is There a Difference Between Camco and MB Sturgis Propane Quick Disconnect Kit
  • There really isn't a significant difference between the MB Sturgis Quick Disconnect Kit part # 104052-401132 and the Camco # CAM59853 as they both perform the same function. We do have the MB Sturgis Quick Disconnect Propane Adapter part # 401132-MBS which has a male 1/4" NPT model 250 quick-disconnect fitting but you would need to use an adapter to convert the male 1/4" NPT to a male 3/8" inverted flare which we do not have. I'd recommend having the female end on the propane accessory...
    view full answer...

  • Replacement Pigtail and Regulator for RV with Winntec 6020
  • Thanks for the picture of the pigtail you are looking for. The part # 100575-20-MBS that you referenced is just what you need. The other parts in your picture are most likely from the regulator so for a new one of those as well you'd want the # 108220 for a dual stage regulator with more than enough BTU rating.
    view full answer...

  • Regulator for Gas Fireplace that Needs 11 inch Water Column from Two Propane Tanks
  • The 11 inch to 13 inch WC requirement you mentioned is standard LP like what the regulator part # 37207-31525 you mentioned provides. This regulator was designed for dual tank setups like you have too and automatically changes between the two so it would work great.
    view full answer...

  • Adding A Tee To An RV Propane System To Fuel Propane Appliances
  • Since you want to keep the regulators on your fire pit and grill you will want to place a tee before the regulator on your RV's propane line. Most people are switching to quick disconnect so I recommend using the MB Sturgis Sturgi-Stay T-Fitting for POL Valve - 2 Model 250 Quick Disconnect Ports Item # 103537-MBS. Based on the picture you sent it the area looks a little tight so you may have to get a few other elbows or extensions to get it placed right. I highly recommend using a certified...
    view full answer...

  • Replacement Propane Gas Regulator for Winntec Model 6020
  • Although we don't carry Winntec products, we do indeed offer a replacement regulator from JR Products as part # 37207-30395. If you click the provided link, you can see a product video for the replacement regulator I recommended.
    view full answer...

  • Quick Disconnect for Blackstone Tailgater Grill and Griddle
  • We have had this question before and learned that there is a quick disconnect you can use with your Blackstone Tailgater Grill and Griddle combo, and you can simply choose from the length you need: - 60 Inches: MB Sturgis RV Quick-Connect Propane Grill Hose # 100304-60-MBS - 120 Inches: MB Sturgis RV Quick-Connect Propane Grill Hose # 100304-120-MBS
    view full answer...

  • Replacement Low Pressure 2-Stage Automatic Changeover Dual Tank Propane Regulator Needed
  • The # 37207-31525 regulator is a compact low pressure 2-stage regulator with an automatic changeover and will work fine with your 2018 Grand Design Imagine Travel Trailer. It has a rating of 262,500 Btu which is more than enough gas flow most travel trailers. The 2 stage design ensures a continuous flow of gas to all of your appliances. This is a great quality regulator for a great price point. If needed, there is a U-Post RV LP mounting bracket available, # 37207-30405. Please note...
    view full answer...

  • What RV Propane Supply Line Is Used from Regulator to Appliances?
  • Regulators normally have 1/4 inch not 3/8 inch connections as does the small appliance. If this is what you have the Quick Disconnect Propane Hose - 1/4" Male NPT - 10' # 37207-31135 along with the MB Sturgis Quick Disconnect Propane Connector - 1/4" FPT # 104052-MBS. If you have 3/8 inch connections, the only option we have for your specific fit is to use multiple hoses. You can use the Propane Hose - 3/8" Female SAE Swivel x 3/8" Male NPT - 2-1/2' # 37207-31405 or the Propane Hose...
    view full answer...

  • Replacement of Propane Hose From Tank to Regulator that Leaks
  • So it's the elbow piece that you need? Without knowing the fittings I can't be sure but since that should be the inlet to your regulator it probably has a 1/4 inch male fitting on the end going into the regulator and a 1/4 inch female on the other. We don't carry any 90 degree adapters with those fittings. If those are correct you can probably bypass it if you can get the hose to connect directly to the regulator. Or if I'm wrong about the fittings let me know what they are and I'll...
    view full answer...

  • Converting Champion Dual Fuel Generator To Allow Multiple Propane Tanks To Connect To Generator
  • I have a couple options that you can consider for your Champion Dual Fuel Generator. First is the simplest as everything can be easily attached to your current hose and regulator. The MB Sturgis Sturgi-Stay T-Fitting w Hose # 103615 will add a tee fitting going into your regulator and allow you to have 2 separate tanks connected to your generator. This will use your current regulator to control the pressure going into the generator. There is a shut off valve for the one remote line...
    view full answer...

  • Replacing Winntec 6020 Regulator on RV Propane Setup
  • The Winntec 6020 regulator that you referenced is a low pressure regulator like what the JR part # 37207-31525 you referenced is designed to replace which will work great. The pigtail you'd need depends on the length that works best for you. # 37207-30775 is 3 feet with a back check, # 37207-30745 is 20 inches with a back check, and # 37207-30715 is 1 foot with a back check. Back checks prevent the hose from leaking in reverse basically where it attaches to the tank. It's a great feature...
    view full answer...

  • Hooking a Propane Grill to a 2019 Tiffin 37BA Motorhome
  • Normally the Tee goes between the tank and the regulator. You would use the hose you looked at, part # 100476-120-MBS, and a Tee that has a quick disconnect fitting like part # 103537-MBS. This would connect to an appliance that normally connects to a 1 pound disposable tank. Such appliances normally have their own regulator and you'd be all set. If your grill doesn't have its own regulator then this setup isn't going to work for you.
    view full answer...

  • Parts Needed to Connect 100 Lb Tank with POL to On-board 5th Wheel Regulator Pigtail
  • You could technically use the Propane Adapter Fitting # 204128-MBS to convert the POL fitting on your 100 lb tank to a Type 1 or ACME fitting, which will allow you to connect the 15 foot Valve Extension Hose # 100914-180-MBS. This would then allow you to connect the male end (with the threads on the outside) of the extension to the green female end of your existing 12 inch pigtail, attached to your regulator. Using two pigtails is not ideal, but if you need the 15 foot extension plus the...
    view full answer...

  • Pigtails Needed to Connect Dual Propane Tanks to Regulator on Travel Trailer
  • For a typical travel trailer propane setup you will have 1 of 2 pigtails. The first will have the Type 1 connector (with the green cap) and the other has a 1/4" MPT fitting like what we find on the pigtail # 100473-12. I believe this is what you currently have but I think the end you're seeing looks like the MB Sturgis Propane Adapter Fitting # 204120-MBS and I think the white plastic piece is part of the back-check. The other type of pigtail that we see has the same Type 1 connector,...
    view full answer...

  • Propane Regulator for MB Sturgis 100473 Propane Hose
  • Yes, you can use the MB Sturgis 100473 hose with a replacement single-stage regulator, which is what it looks like you need based on your photo. For the regulator you will need the Camco Single Stage Propane Regulator # CAM59013. Then for the 100473 hose you can choose the one you need based on the length: - 12 inches: MB Sturgis Propane Hose - RV Type 1 with Back Check x 1/4" MPT # 100473-12 - 15 inches: MB Sturgis Propane Hose - RV Type 1 with Back Check x 1/4" MPT # 100473-15-MBS -...
    view full answer...

  • Swapping One Of Your 30 Pound Propane Tanks For A 100 Pound Tank
  • If your trailer is like most then you will not need another regulator. Take a look at the plumbing currently attached to your 30 pound tanks. You should find a short standard propane hose running from one propane tank to the changeover valve, and another hose (from the other 30 pound tank) running to the other connection on the changeover valve. From there the gas will go through an attached regulator and out the bottom to service your trailer. Some trailers have the regulator as a...
    view full answer...

  • Recommended Propane Fittings and Hose for Jetboil
  • I have a couple options I recommend for you. If you want a short cable, I recommend the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 4' # 100476-48-MBS. If you want a little more distance from your camper, then use the MB Sturgis Quick Disconnect Propane Hose for Small Appliance - Disposable Cylinder Port - 10' # 100476-120-MBS. Both options will work well with the low flow quick release adapter on the back of your trailer. If you want...
    view full answer...

  • How To Hook Up a Blackstone Tailgater To a Quick Disconnect Propane Port On Trailer
  • In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part # 100304-60-MBS or part # 100304-120-MBS. I called Blackstone and they said you can remove the hose with included regulator that comes with the unit and install the above on the fitting that comes out of the gas knob that way you can attach this directly to your trailer. The quick disconnect port on the side of...
    view full answer...

  • Replacement Propane Hose Pigtail for Connecting Regulator and Propane Tank on Camper
  • I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the necessary pigtails in many lengths for rubber hose, you can use # 37207-30755 for a 2 foot length, # 37207-30775 for a 3 foot length or # CAM59183 for a 4 foot length. If you'd prefer braided steel hose for durability, use part # 100833-24 for a...
    view full answer...

  • Recommended Replacement for GR-618 High Pressure Regulator
  • Thank you for the photo. Your JR Products model GR-618 is a single stage, 18 psi, high-pressure regulator that is no longer available. It has been replaced by the JR Products High Pressure RV LP Gas Regulator (model GR-630) # 37207-30325, which is a suitable replacement. I highly suggest also picking up a tube of gas pipe thread sealant # 37207-30555 to help prevent any leaks. This can be used on all metals, plastic, PVC, fiberglass, CPVC, and nylon threaded applications.
    view full answer...

  • Replacement Propane Gas Regulator for Winntec Model 6020 on 2018 Grand Design Imagine Travel Trailer
  • These are very similar products, the RV LP Gas Regulator, # 37207-30395 is a dual stage regulator with auto changeover and rated at 345,000 Btu. The # 37207-31525 is rated for 262,000 Btu. Each option has a 1/4" FIF inlet x 3/8" FPT outlet. The specs for the Winntec 6020 Propane Regulator show it to be a rated at max capacity of 210,000 Btu. You can go at a higher rated Btu regulator when replacing. The Camco Automatic Changeover 2-Stage Propane Regulator, # CAM59005 is actually rated...
    view full answer...

  • Parts for 40 Pound Propane Tank Connection.
  • The parts you are suggesting are; # 37207-31455 Propane Hose, # 37207-31525 regulator, and # 100575-15-MBS propane tank Type-1 pigtail. Looks good for two 40# tanks. If you only have one tank, then you only need one pigtail and you can use a regular regulator like the JR Products # 37207-30335 made for RV's and supporting 175,000 BTU. Select a regulator based on the application. You can email me back if you need a different sized regulator.
    view full answer...

  • 12 Foot Quick Disconnect Propane Hose and MPT Adapter for Connecting to RV Grill
  • The part # 37207-31235 will give you 12 feet of hose that will attach to the quick disconnect you have on your RV. For an adapter then we have the part # 401132-MBS which gives you a male quick disconnect on one side and a 1/4 inch MPT fitting on the other like you described needing.
    view full answer...

  • Replacement Automatic Changeover and Pigtails for Propane Tanks
  • The Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525 doesn't have a specific length requirement for the pigtail connections. You can absolutely use the MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 2' # 100833-24 but they are 3 times longer than your current pigtails. If you just want slightly longer hoses you can use the Propane Hose with Back Check - Type 1 x 1/4" Male Inverted Flare - 1-1/2' # 37207-30735 or...
    view full answer...

  • Is JR Products 2-Stage Automatic Changeover Regulator a Good Replacement for Fairview GR-9984
  • A lot of propane regulators carry similar specs and are pretty comparable when it comes to quality. JR Products does a great job at pairing up good quality with a cost-effective product like the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525. I reached out to my contact at JR Products who let me know that this regulator is rated for 262,500 Btu so it is on par with the Fairview regulator GR-9984 that you're looking at. One other thing you might...
    view full answer...

  • Determining Correct Automatic Change Over Propane Regulator For Generator
  • You are on the right track, but you will need to replace your current regulator hose as all of the automatic change over units are regulators, and you cannot have two regulators. To determine the correct replacement regulator for your generator you will need to know the BTU per hour requirement of the generator. You should be able to find this information in the owner's manual for your generator or by contacting the generator manufacturer. Once you know the correct BTU per hour rating...
    view full answer...

  • Recommended Pig Tail Hose for Camco Automatic Changeover 2-Stage Propane Regulator
  • In order to use the Camco Automatic Changeover 2-Stage Propane Regulator part # CAM59005 you'll need the MB Sturgis Propane Pigtail part # 100833-24, one for each tank. This pigtail has an inverted flare fitting which is what you need for the above regulator which already has a brass NPT to Inverted Flare Fitting installed. The hose is 24" long so you will have plenty of length.
    view full answer...

  • Mounting Bracket For JR Products Dual Stage Automatic Changeover RV LP Gas Regulator
  • To use a mounting bracket with the JR Products Automatic Changeover RV LP Gas Regulator # 37207-30395 you will need part # 37207-30405 or part # 37207-30355 as this regulator does not come with a mounting bracket.
    view full answer...

  • Adding an External 20 Pound Propane Tank to Supplement Onboard RV Propane Tank
  • Yes, you can do this, but to be clear, we will add a Tee fitting that will allow you to use your onboard propane tank and an outdoor 20 pound tank. You cannot use this to refill or add to the primary onboard tank. You can use the JR Products # 37207-30135 Propane T-Fitting to go between the onboard tank and the POL connector currently attached to the tank. Then use a JR Products # 37207-30785 pigtail to connect your 20 pound tank. You didn't ask about this but you can optionally...
    view full answer...

  • Connecting Blackstone Tailgater to 5th Wheel Propane System
  • For your grill, you normally wouldn't use an additional regulator and would just use the high pressure system since you have the flame adjustment knobs to regulate your output. You can use the MB Sturgis Quick Disconnect Propane Adapter Fitting - Male Model 250 x 1/4" MPT # 401132-MBS to connect to the grill itself. Then use MB Sturgis Dual Quick Disconnect Propane Hose for Small Appliance - 10' # 100395-120-MBS to connect to Tee # 103613-MBS.
    view full answer...

  • Which Regulator Should I Use to Replace a Wintec 6020 Regulator on 2018 Jayco Jayfeather 23RL
  • In reality, both the # 37207-31525 and the # 37207-30395 would be acceptable replacements since most folks aren't going to be utilizing that much gas at the same time; even running all of your gas powered appliances at the same time on maximum power, you should still not have any issues running either regulator. If you do tend to run a lot of gas appliances at the same time then you're going to be best suited with the 345,000btu Automatic Changeover RV LP Gas Regulator # 37207-30395....
    view full answer...

  • How Do I Connect Griddle To Propane Tank
  • If you have a 3/8" male flare fitting on the backside of your regulator that is attached to your griddle, you will need a 3/8" female fitting to make connection and the opposite end of hose will need to have the female POL Type 1 fitting. I suggest the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 30", # 100473-30-MBS and then use the Propane Adapter Fitting - 3/8" Female SAE Flare x 1/4" Female NPT, # 37207-30225.
    view full answer...

  • What Hose and 2-Stage Regulator Do I Need for My Travel Trailer?
  • The fitting you need is a type 1 like the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 20" # 100473-20-MBS. As far as the regulator, I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313. If you need the supply hose, that is the # 37207-31255. It is important to note that this supply hose is for the standard 3/8" male fitting on the manifold.
    view full answer...

  • Is it Possible to Connect My Coleman 285 Portable Grill to a Regular Sized Propane Tank
  • Yes, there is a way to connect your Coleman 285 Portable Grill to a regular sized propane take. You will need the MB Sturgis Propane Adapter Hose for Small Appliance - Type 1 x Disposable Cylinder Port - 12' # 100555-144-MBS. This will connect your portable grill straight to the propane tank.
    view full answer...

  • Propane Regulator to Replace Marshall 605H Model 290
  • We have what you are looking for but your regulator currently vents out of the bottom of the regulator and the one you referenced vents out of the side. So to match the correct orientation you'd want the part # CAM59313.
    view full answer...

  • Can Single Stage Regulator Be Used for Both 20 Pound and 100 Pound Propane Tank
  • A single stage regulator like the MB Sturgis # 108072 you referenced will indeed work on either a 20 pound or 100 pound propane tank. It's important to note though that the regulator type is really dependent on the propane-powered appliance you're using and not necessarily the tank itself. A dual-stage regulator like # 108221 will provide a more constant/consistent pressure for your appliance.
    view full answer...

  • How to Connect 20 Pound Propane Tank to Champion 100165 Dual Fuel Generator
  • To connect your Champion #100165 Dual Fuel generator to a 100 pound propane tank, the manufacturer states that "The generator can be attached a larger propane tank. The generator requires ½ PSI with a flow rate of 152,000 BTU/hr. when under maximum load. The connection on the front panel is a male 3/8" SAE flare fitting using 5/8” 18 UNF threads." To accomplish this you will need three parts; a cylinder connector (green knob) a propane regulator oriented verticle or horizontal, and...
    view full answer...

  • Replacement Propane Hose for Marshall HP424
  • According to my research, the Marshall HP424 does have a Type 1 connection (which connects to your propane tank) and a 1/4" Male NPT connection (which connects to a dual-stage regulator). So the hose you mentioned will work as a replacement, and there are a number of different lengths if you were in need of one. - 12 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-12 - 15 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4"...
    view full answer...

  • Recommended Regulator for 100 lb LP Tank
  • The MB Sturgis 2-Stage Propane Regulator part # 108221 for horizontal mount or part # 108220 for vertical mount is what I recommend for a 100 lb lp gas tank. It does not matter which you choose so long as you have the vent pointed downward. I much prefer the dual stage regulators over the single stage as they are more accurate, perform better in the cold, and most can be adjusted if needed. The above two options will will be plenty for a water heater and stove. In order to connect either...
    view full answer...

  • Recommended Receiver Hitch, Drawbar and Wiring Harness for 2020 Chevrolet Impala
  • For your 2020 Chevrolet Impala I suggest the Curt Trailer Hitch Receiver, # C12115 simply for the slightly higher tongue weight rating of 350 lbs. over that of the 300 lb. TW of the Draw-Tite option, # 36538. The Curt Trailer Hitch Receiver, # C12115 is a Class II, 1-1/4" hitch with maximum gross trailer weight of 3,500 lbs. and max TW of 350 lbs. It is a bolt-on installation with all hardware included. If the coupler on your utility trailer requires a 2" Ball, select the Curt Class...
    view full answer...

  • Parts to Connect Blackstone Griddle to RV Propane Supply
  • As you noted, you can't have the propane supply going through two regulators as it would not supply the correct pressure that your griddle needs to function properly. It doesn't look like the the propane regulator on the 36-inch Blackstone griddle is removable; therefore, you have two options. The first option you have is to not use the quick disconnect port on your trailer and instead tap into the propane supply before it goes through the regulator with a combination of the MB Sturgis...
    view full answer...

  • 12 Propane Pigtail
  • If you have a 1/4 Inch - Male NPT, I suggest the # 100473-12. If you have a 1/4 Inch - MIF, then I suggest # 100833-12. If you have brass fittings in the inlets on the regulator then you most likely have the inverted flare.
    view full answer...

  • Parts Needed to Connect 20lb Propane Tank to RV Appliance
  • For your Propane lines, you will need to start with the pigtail, then regulator, then main line, tee, and alternate lines. I recommend the following: Pigtail # 100473-12 Regulator # 37207-30325 Tee # 37207-30055 Because I don't know the connections on your appliances, I don't know the supply lines you need from the 1/4 inch Male Inverted Flare connections to your appliances.
    view full answer...

  • Connecting a Nexgrill Propane Grill to a Trailer's Built in Quick Disconnect
  • The quick disconnect outlet on your Rockwood is already regulated so you need new hose that doesn't have a regulator on it. The hose needs a quick disconnect on one end of course and a 3/8 female flare on the other. We carry two hoses with these connections: 60 inch part # 100304-60-MBS 120 inch part # 100304-120-MBS You didn't say how long it needs to be but they'll both do the job.
    view full answer...

  • Recommended LP Gas Regulator for 100 Lb Tank
  • The MB Sturgis 2-Stage Propane Regulator part # 108221 for horizontal mount or part # 108220 for vertical mount is what I recommend for a 100 lb tank. It does not matter which you choose so long as you have the vent pointed downward. These regulators will work just fine with both propane and lp gas. In order to connect either regulator you can use the MB Sturgis POL Propane Tank Connector Fitting part # 204051-MBS or the MB Sturgis Hose Assembly part # 100202.
    view full answer...

  • Recommended Type 1 Propane Pigtail with Dark Green Connector
  • It sounds like you're looking for a Type 1 propane pigtail, which are available in 12" with part # 100833-12, 18" with part # 37207-30735 or 30" with part # 100575-30-MBS; these all have the dark green Type 1 connection that you're seeking but they do not come in a 10" long version. For the 1/4" MIF to 1/4" Female MPT adapter you can use the # 402258-MBS which does not have a back check, or the # 204120-MBS which comes with a back check. There is not a Female MPT to MIF adapter available,...
    view full answer...

  • Adapters Needed For Female POL Fitting To Type-1 Fitting
  • To connect to the POL fitting on your 100lb tank you'll need the MB Sturgis Propane Hose # 100022-144-MBS which has a male POL fitting and the MB Sturgis Disposable Propane Bottle Adapter Fitting # 204132-MBS which will connect to the 1"-20 fitting on the hose and to your green Type-1 fitting on your RV.
    view full answer...

  • Replacement Propane Supply Hose From Regulator to RV Propane Supply Line
  • It sounds like you're looking for a 3 foot long supply hose; typically the outlet end of a regulator will almost certainly be a 3/8" female NPT and from the picture you sent it looks like you've got a female flare connector on the other end that goes to the metal RV piping. Additionally, since you've said that the piping side is larger it sounds like you're looking for the # 37207-31445 which has a 1/2" Female flare connector on one end and a 3/8" male NPT on the other.
    view full answer...

  • Is it Better to Use a Single-Stage or a Two-Stage Regulator for Your Appliances
  • Though your heater unit has a built-in regulator, it is only capable of handling a very narrow flow rate range. For this reason, it's best to not consider an appliance's built-regulator as a replacement for the second stage for a two-stage regulator. I recommend going with a two-stage regulator as they are going to ensure that the flow rate going to your appliances is a constant 11" water column pressure. The regulator that you referenced, part # CAM59013, is a single-stage and best...
    view full answer...

  • Equipment Needed To Hook Two Propane Tanks Up To A Propane Appliance
  • You can hook the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS up between your two 20lbs propane tanks but the # 100473-12 will not work as supply lines because you need a male inverted flare tip like the MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare - 15" Item # 100575-15-MBS. Then you can use the MB Sturgis High Pressure Propane Hose - 3/8" MPT x 3/8" Female Flare Swivel - 6' Item # 100040-72-MBS as long as the grill you're hooking up to...
    view full answer...

  • WIC 6020 Regulator Threading Instructions
  • Yes, the righty-tighty / lefty-loosey method is the correct way to thread/unthread your hoses on a WIC 6020 Regulator or on the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator # 37207-31525.
    view full answer...

  • Measure Level of Propane in two 120-pound Propane Tanks
  • There are several methods to try and determine the amount of liquid propane remaining in a tank. The first is a pressure gauge like the Camco # CAM59023. This reads the pressure of vapor propane which remains steady until mostly empty then the needle moves quickly to empty. However, Camco does not recommend this product for 2-tank systems. The next method involves measuring the temperature of the tank walls comparing the vapor gas at the top of the bottle which will be nearly room temperature,...
    view full answer...

  • 12' LP Gas Hose With 3/8" Female SAE Flare Swivel
  • We have the Propane Hose # 37207-30955 that is 12' long with both ends having the 3/8" Female SAE Flare Swivel.
    view full answer...

  • Does JR Products Automatic Changeover Regulator Include Back-Check Valve
  • The JR Products automatic changeover regulator, part # 37207-31525, does have a back-check valve so you don't need to purchase the adapters separately with part # 204120-MBS. You only need to purchase the adapters if you need a replacement for any reason.
    view full answer...

  • Recommended Propane Tank Gauge and Regulator for 100 lb Tank Connection to Generator
  • For your 100 lb propane tank, I recommend the Camco Propane Cylinder Gas Gauge and Leak Detector # CAM59023 and then the Camco Horizontal 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59323. If you want a second tank connected to automatically changeover, then I recommend the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator # 888001-MBS.
    view full answer...

  • Camco Olympian Wave 8 Heater Compatibility With 1 lb Disposable Propane Tank
  • Your Camco Olympian Wave 8 heater utilizes a 3/8 female flare swivel connection. If you already have the hose with the regulator for a standard 20 or 30 lb tank, then you can simply use the Camco Propane Adapter - Female P.O.L./Male ACME x 1"-20 Throwaway Cylinder # CAM59213 you referenced or the MB Sturgis Disposable Propane Bottle Adapter Fitting # 204132-MBS. If you don't already have the hose, you can use the Camco Low-Pressure LP Gas Regulator w/ 6' Long Hose # CAM57703 with the...
    view full answer...

  • Correct Propane Pigtail to Connect Camco Single Stage Regulator to 20 lb Propane Tank
  • We do! To connect the Camco Single Stage Propane Regulator # CAM59013 to a 20 lb propane tank you will need the MB Sturgis Propane Hose w/ Back Check # 100473-20-MBS and you need to make sure that you use a sealant like part # 37207-30025 to avoid gas leaking out of that connection. I don't know what type of connection you have on your Sears dryer but the outlet side of this regulator is a 3/8" female NPT connector if that helps. If you're still unsure of how to connect your dryer...
    view full answer...

  • What Style Connector Do I need on my Replacement Propane Pigtail Hose
  • There are different options depending on what style connector you have. I have included an option for both an NPT and MIF. You would just want to check what style is on your hose to ensure you get the correct hose. NPT MB Sturgis Propane Hose w/ Back Check # 100473-20-MBS MIF MB Sturgis Propane Pigtail # 100575-20-MBS Both of these hoses have internal back checks and will let you power all of your RV's appliances. If you look at your regulator and and there are two brass adapters...
    view full answer...

  • Propane Regulator Compatible with Tankless Water Heater 157,000 BTU
  • You can use a propane tank for the BTUs needed and simply use the appropriate fittings and regulator. For the regulator, I recommend the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 you referenced which has an 11 inch water column. If you don't have the POL fitting, then I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313 or the horizontal 2-Stage # CAM59323 which can use the MB Sturgis Propane Pigtail - Type 1 x 1/4"...
    view full answer...

  • Hoses That Fit JR Products Automatic Changeover Regulator Replacing Winntec 6020
  • You will need hoses with a 1/4" male inverted flare to connect to the JR Products Automatic Changeover RV LP Gas Regulator # 37207-30395. I was unable to find the hose size that connected to the Winntec you have, but if they don't fit, then they wouldn't be 1/4" male inverted flare, as that's the correct size for the # 37207-30395. So you will need new hoses, and can choose the length you need from the following, each of which has the correct fitting to connect to your regulator: -...
    view full answer...

  • Replacement Propane Regulator for Horizontal Low Pressure 2-Stage Fairview GR-9959
  • Hello, we actually have a couple options available for you. While we do not have the exact same regulator available, Fairview GR-9959, we have two options from different manufacturers that are similar specs and either will work well as a replacement for your current GR-9959. The first is the item you linked to that is a great product, the JR Products Horizontal Low Pressure 2-Stage RV LP Gas Regulator, # 37207-30385. But we also have my preferred option, the MB Sturgis Horizontal...
    view full answer...

  • Recommended Quick-Connect for Blackstone Tailgater
  • According to Blackstone, the fitting that comes out of the gas knob is a male 3/8" inverted flare so I recommend using the MB Sturgis RV Quick-Connect Propane Grill Hose - 120" Long # 100304-120-MBS. The MB Sturgis Quick Disconnect Propane Adapter Fitting - Male Model 250 x 1/4" MPT # 401132-MBS or the Camco Quick-Connect Kit for Low Pressure Propane Systems - Valve and Full Flow Plug # CAM59853 will adapt a 1/4" NPT hose to provide the functionality of a quick-disconnect system.
    view full answer...

  • Propane T-fitting with a Type 1 Connector That Has a Quick Disconnect
  • There is, the MB Sturgis Sturgi-Stay T-Fitting for Type 1 Valve # 103613-MBS has the Type 1 connector and then also has a quick disconnect you can use for your grill and a disposable cylinder port.
    view full answer...

  • High Flow Propane Pigtail Hose For A 400,000 Btu Propane Regulator
  • For you we have a couple options: The MB Sturgis Propane Pigtail # 100575-60-MBS, which is 5' long, and has a maximum flow rate of 450,000 Btu per hour. Or If you want a shorter hose, you can use the MB Sturgis Propane Pigtail # 100575-48-MBS which has the the same maximum Btu flow rate of 450,000, but is 4' long instead of 5'.
    view full answer...

  • Is Male Inverted Flare of MB Sturgis Sturgi-Stay Propane Fill Hose Reverse Flare
  • The inverted flare side of the MB Sturgis Pigtail part # 100019-15 is not a reverse flare.
    view full answer...

  • 100 lb Cylinder Set-Up To Heat Trailer In Winter
  • It shouldn't be a problem to hook up a 100 lb cylinder to your trailer while it is stored for the winter. As long as you have the correct fittings, you'd just need to disconnect your dual tanks from the trailer's propane line and close them, and make sure your 100 lb cylinder is connected to your trailer's propane line with a dual-stage regulator and a POL hose. It's likely that the pigtails you already have with your smaller dual cylinders won't work with the 100 lb cylinder, so you...
    view full answer...

  • Recommended Propane Pigtail For Changeover Regulator With At Least 300,000 BTU Per HOur
  • You can use the MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare - 5', part # 100575-60-MBS. It is 5' in length and it has a maximum flow capacity of 450,000 BTU per hour. I have included a product description link and a video review link below.
    view full answer...

  • Regulator for 2 38,000 BTU Propane Water Heaters
  • For the best option, you need a 2-stage regulator like the MB Sturgis Horizontal 2-Stage Propane Regulator - 11" Water Column Outlet # 108221 or the MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220. The 2-stage regulator provides a more constant stream of pressure which is always ideal for propane applications.
    view full answer...

  • What Part do You Recommend to Connect a Pop-Up Camper Stove Directly to a Propane Tank?
  • Since the photo you sent is of a male quick disconnect, the part you need before connecting to your regulator is the MB Sturgis Sturgi-Stay T-Fitting for POL Valve - 2 Model 250 Quick Disconnect Ports # 103537-MBS. I went ahead and attached a video that walks you through the components of this setup.
    view full answer...

  • Determining Correct Propane Pigtail Hose For Trailer
  • Depending on the specific propane regulator on your trailer you will either need the MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4 Male Inverted Flare # 100833-36 or the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 36" # 100473-36-MBS. The easiest way to determine the correct hose for your regulator has a brass fitting as shown in the included picture or not. If you have the brass fitting you will need the # 100833-36, and you instead connector directly...
    view full answer...

  • Difference Between 5 Foot MB Sturgis & JR Products Type 1 x 1/4 Male Inverted Flare Hose
  • The two hoses you mentioned are the same hose, but manufactured by different companies: - MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare # 100575-60-MBS - Propane Hose with Back Check - Type 1 x 1/4" Male Inverted Flare # 37207-30795 The significance of the male inverted flare is that is one of the fitting types on the hose. Male inverted flare fittings generally attach to dual stage regulators. If you have two propane tanks that are attached to a dual stage regulator...
    view full answer...

  • Connecting Type 1 Propane Leak Gas Gauge to POL Tank
  • You're right the propane gauge you purchased, part # CAM59023, connects using a Type 1 connector. But your tank needs a POL. All you need is an adapter part # 37207-30125.
    view full answer...