Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Monitor propane levels in 2 compatible steel LP tanks with these Bluetooth sensors using your smartphone, tablet, or optional handheld monitor. Confirm you have enough fuel before dinner, a hot shower, or a cold night in camp.
It's easy to lose track of how much propane is left, especially when your tanks are tucked behind a cover or mounted on the trailer. These Bluetooth sensors monitor propane levels on 2 tanks at once, with each tank shown separately on your Bluetooth-enabled smartphone or tablet. You can also pair the sensors with the Mopeka handheld monitor (MP64FR - sold separately). If you're using the Waltech Smart Thermostat (WA74FR - sold separately), the sensors also communicate with the Waltech system so you can monitor your propane supply as part of your connected RV setup. Check your propane level anytime, so you know when it's time to refill.
Each sensor attaches magnetically to the bottom of a compatible steel LP cylinder, where it measures the propane level inside the tank. Once paired with your Bluetooth-enabled smartphone or tablet, you can check each tank individually without removing the tanks or interrupting your propane supply. The sensors also work with the Mopeka handheld monitor (MP64FR - sold separately).
Many RVs use an automatic changeover regulator that switches to the reserve tank when the primary tank runs empty. Without checking, it's easy to keep camping without realizing one tank is already empty. These sensors let you monitor both tanks independently, so you know when it's time to refill the empty cylinder instead of unknowingly running on your reserve tank.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steven here with etrailer. Let's take a look at our Mopeka Bluetooth propane tech sensors. So folks, if you're using propane for your grill, RV, camper, fire pit, portable heater, who knows The biggest question is always how much propane is actually left in that thing (nails tap) I can tap on it. I can hear if it's hollow or not. I can even shake it, maybe I feel some weight in there, but you really don't know exactly how much is in there. Now we sell and lots of our people sell them too.
You can screw on, put in line different sensors. But what if you can do it without that extra step, right Well, that's where this comes into play. These are wireless Bluetooth sensors. You're gonna get two, quantity two included with purchase. And on the back they have a couple magnets and a sensor that's gonna give you a readout when now there's no drilling, wiring, attaching, anything like that.
You just use your smartphone that has Bluetooth enabled and you can check the level of each individual sensor through their free app by Mopeka. And that app and everything will be listed in the instructions when you get it from purchase. Now you can also use sold separately a tank monitor, item number MP64FR, again, sold separately. And it can do both tanks as you can see there from that image and give you the readouts via color LED lights from full to empty. Now these are gonna be really convenient because they literally just stick onto the bottom of your tank.
The first thing you wanna do per the instructions, you're gonna get some dielectric grease. You want to put a little dab right on the sensor. Bam, that's it. That's all you got to do. It's magnetic.
You just put it right on the bottom of the tank. It's gonna use ultrasound waves and give you that reading. Now the other thing you're gonna get, you're gonna get eight of these aluminum little legs, so four for each one. So this is enough to do two tanks. And basically you put them on the bottom like I did if you don't have a gap already under your tank, meaning if this is sitting directly on the ground or maybe flat on the bed of a trailer or something and there's no gap under it, it does need a little gap to get the reading. So you wanna make sure you have these legs installed that come with it. Again, you're gonna get four per sensor. But again, if you don't have that, this is just sitting on like a graded kind of stand or something where it has plenty of space underneath it or even light underneath it. It's gonna do just fine. So let me pull that back off here. So again, you're gonna get two of them. And as you saw, they're so easy to install. They just simply stick on with the magnets and then they're gonna give the readout very clearly again on that monitor sold separately or on your Bluetooth device that you pair with it. Now this sensors work with steel LP cylinders that are under 100 pounds. So you can use a variety of different common RV and a portable tanks, just make sure that they are steel and that they're not any larger than 100 pounds. So what I like about these is, again, they are wireless. You just use your handheld device, check it on the fly. Or if you purchase that monitor sold separately, you can have it inside your RV on the wall and you can quickly see what's going on there. So that's a great option for you. These again are the Mopeka propane tank check sensors. I'm Steven. Thanks for watching.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Kate F.
8/20/2026
I am very sorry to hear this Gretzky. Have you tried replacing the batter? *To replace it, carefully pry the sensor housing apart at the snap-fit points with a small screwdriver, lift the circuit board enough to access the battery, replace the CR2032 in the same orientation, then reassemble the housing. Be careful not to pull on the internal wires or pinch them when closing it back up.