Recommendation for an Aluminum Toolbox for a 16 x 12 x 14 Inch Generator

Question

Question:

I am looking for a storage box for my generator to go on the front of my travel trailer. The generator size is 16.1L 12W x !4inch H. Do you have a box preferably aluminum that this will fit into?

asked by: Ron

0

Expert Reply:

I have a good option for you. The box will be a little larger than the dimensions you have given but it is the closest match I could find. Take a look at the DeeZee box # DZ61. This is an aluminum box that measures 24 inches long, 18 inches wide, and 18 inches tall.

expert reply by: Michael H

0

Answer 1

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 2

The collapsed height of the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is 28-5/8" from the base of the wheel to the top of the jack tube. The tallest measurement of the jack when fully extended is 31-15/16" from the center…

view full answer...

Answer 3

I spoke with my contact at DeeZee, who did not have any information as to whether or not the box would fit in front of the wheel well, rather than in its typical installation behind it. However, the foot or bottom of the box is 17 inches in length.…

view full answer...

Answer 4

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

view full answer...

Answer 5

The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank #DZ91752X that you referenced is 22-1/2 inches. We've found that it typically fits pretty easily under tonneau covers like what you see in the attached picture, but you…

view full answer...

Answer 6

We've got the exact replacement breakaway system battery you're looking for. You'll need the Hopkins #HM20008. As you can see in the provided photo, the #HM20008 is a direct replacement.

view full answer...

Answer 7

Hey Connor, when the etrailer jack #e22ZV is retracted the overall height of the jack measures 17-3/4 inches.

view full answer...

Answer 8

Hello Ross, thanks for reaching out. For the etrailer Swivel Jack w/ Bolt-On Mounting Plate #e22ZV the distance from the bottom of the pipe mount bracket to the bottom of the jack when fully retracted is 8". I edited a picture to illustrate. Let…

view full answer...

Recommendation for an Aluminum Toolbox for a 16 x 12 x 14 Inch Generator

Product Page this Question was Asked From

Continue Researching