Using DeeZee Wheel Well Tool Box In Front of Wheel Well on 2011 Dodge Ram

Updated 04/19/2013 | Published 04/17/2013

Products Featured in This Question

DeeZee Specialty Series Passenger's-Side Wheel Well Tool Box - Aluminum - 2.2 Cu Ft - Silver

(9)

$353.58

DeeZee Specialty Series Driver's-Side Wheel Well Tool Box - Aluminum - 2.2 Cu Ft - Silver

(9)

$353.03

Question:

can the dz94 fit in front of fender wells

asked by: Warren

Helpful Expert Reply:

I spoke with my contact at DeeZee, who did not have any information as to whether or not the box would fit in
front of the wheel well, rather than in its typical installation behind it. However, the foot or bottom of the box is 17 inches in length. If you have at least 17 inches of floor space between the rear of the wheel well and the front of the truck bed, the box should fit. (Make sure to allow for the thickness of the lip at the top of the bed.)

If you should find that the box fits, you will need to use the box designed for the passenger side, part # DZ94 on the drivers side and the box designed for the driver side, part # DZ95 on the passenger side so that the lids open correctly.

expert reply by: Mike L