Does Curt Hitch # C11525 Fit 2020 Honda Accord Hybrid

Question

Question:

Will this work on a 2020 Accord Hybrid? I understand the battery in the new hybrid is flattened out and basically runs the length of the undercarriage. Does this create problems for bolting locations? Thanks!

asked by: Marc

0

Expert Reply:

We do not have a hitch that will fit for your 2020 Honda Accord Hybrid. Instead, you can carry bikes on a trunk mounted rack or cargo on a roof rack. Both are available for your Honda Accord.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, the Draw-Tite Sportframe Trailer Hitch Receiver #24972 is the correct trailer hitch for your 2021 Honda Accord Hybrid model. Attached is an installation video of this hitch on a 2021 Accord as well as a photo showing what the finished result…

view full answer...

Answer 2

I sure do Jim! To add a hitch to your 2025 Acura ADX, I recommend the Curt item #C27RJ. This custom fit class III hitch has a 2" receiver and provides a 2,000 lbs towing capacity along with a 200 lbs maximum tongue weight. I like the Curt Hitch…

view full answer...

Answer 3

To add a hitch to your 2019 Honda Accord Touring hybrid, you will need the Draw-Tite Trailer Hitch item #24972 you were looking at. This hitch is custom fit and bolts to your Honda with included hardware. This is a class I hitch with a 1-1/4"…

view full answer...

Answer 4

Hi Jebs! When we installed our etrailer hitch #e98840 on a 2018 Honda Pilot, we found the center of the pin hole sat 4-1/2" back from the bumper. You will of course want to measure this on the hitch you have already as it may be different, but…

view full answer...

Answer 5

Hey Kevin, yes the Fogatti InstaShower 9 with Black Door #FG25FR would be as simple of an install as what you mentioned. Each of the connections you mentioned would need to be made and you'd be set. The controller that comes with this would be…

view full answer...

Answer 6

The etrailer Trailer Hitch Receiver part #C64NR and etrailer Trailer Hitch Receiver part #e98855 are both fits for a 2019 Honda Odyssey (All Models). I recommend the Curt Trailer Hitch Receiver because it will be more hidden once installed. In regard…

view full answer...

Answer 7

Hey Rick, sorry about the confusion but the etrailer hitch part #e98848 that you referenced fits both the hybrid and non-hybrid versions of the 2025 Honda CR-V including your Sport model. It is organized in our fitguide in a somewhat confusing way…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Does Curt Hitch # C11525 Fit 2020 Honda Accord Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching