2015 Ram Promaster 1500 Van HiTop RV Ride Improvement Recommendation

Question

Question:

Dear Jameson I am surprised that the problem is not in the front of my van. Please see attached pictures. The van weighs 9000 pounds. It sits 3 inches lower in the front than the back. Thbanks

asked by: Hughes

0

Expert Reply:

Best improvement we can help you with is a rear sway bar upgrade for your 2015 Ram Promaster RV with the Roadmaster sway bar # RM-1129-143. This will do the best job and improving the issues you mentioned. Since Ram built your vehicle without it having an RV body installed on it the rear sway bar just isn't adequate to provide you with a stable and smooth ride quality. That's why the Roadmaster bar will help a great deal as they designed this bar to fit your vehicle and be setup for and RV application like yours.

expert reply by: Jameson C

0

Hughes

1/9/2020

Dear Jameson I am surprised that the problem is not in the front of my van. Please see attached pictures. The van weighs 9000 pounds. It sits 3 inches lower in the front than the back. Thbanks

Jameson C.

1/9/2020

Since the majority of an RV's weight is on the rear of the vehicle it's typically a rear sway bar that makes this biggest improvement. I did more research and it appears that the rear suspension of the ProMasters is what causes them to feel so harsh. You're at a weight where I wouldn't go with a lower spring rate or cut out a leaf spring like a lot of people recommend, but the sway bar will help make the vehicle feel more stable and also some recommend lowering tire pressure a bit.

Answer 1

Assuming that your RV doesn't already have one, an anti-sway bar like #RM-1129-143 will keep your rear axle tied perpendicular to the frame which will be the most effective way to prevent the front end from getting squirrely on you. However, this…

view full answer...

Answer 2

The Roadmaster Rear Anti-Sway Bar #RM-1129-143 is going to mount just above the leaf springs on your ProMaster (pictured below in black and white). Judging by the pictures you've sent in the battery box doesn't interfere with where the sway…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

2015 Ram Promaster 1500 Van HiTop RV Ride Improvement Recommendation

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching