Wiring Configuration of 3 Pins on Optronics 3-Wire Pigtail # A45PB
Published 11/22/2019
Question:
I have a lighting unit that is designed to accept this three prong plug. Canyou identify which wire color goes to each pin please? I am trying to test continuity and that is not working.
asked by: Bill H
0
Expert Reply:
I have attached a diagram below that points out the function of each pin on the Optronics 3-Wire Pigtail # A45PB that you can use for reference. On the wires themselves the white wire is for ground, the red wire is for turn/brake signal, and the black wire is for running lights.
expert reply by:
Chris R
0
click to enlarge
Product Page this Question was Asked From
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Wire Color Codes for Optronics 3 Wire Taillight Wiring Pigtail
- Q&A: Upgrading 4-Way to 7-Way Trailer Wiring on 2014 Subaru Outback with No Brake Controller
- Q&A: How Long is the DeeMaxx Trailer Wheel Lug Nut
- Q&A: What Size Socket is Needed for DeeMaxx Trailer Wheel Lug Nut
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Recommended 3-Prong 3-Wire Pigtail for a Optronics Trailer Tail Light
- Article: Trailer Wiring Diagrams
- Q&A: Latch for 1-7/8" Thick Horse Trailer Door—What Are Your Options?
- Q&A: Can Stabilizer Jacks be Used to Lift RV a Little
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
- Article: Performance Chips and Modules
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision