Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series

Question

Question:

does this hitch come in a bolt on unit

asked by: Doug

0

Expert Reply:

The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs.

expert reply by: Heather A

0

Answer 1

Hello Allen. Yes, you can use a load equalizer/weight distribution hitch with the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055. As long as it is properly installed, and you stay under the 10,000 lb towing 1,000 lb tongue…

view full answer...

Answer 2

Both! I checked with Buyer's Products and their Class 4 Service Body Long Hitch item #3371801055 can either be welded on or bolted on with the included hardware. This is a universal hitch so you'll need to drill into your trucks frame if you…

view full answer...

Answer 3

The best option we have available for your International 4700 is the Buyers Products Class 4 Hitch Receiver #3371801055. This can be either bolted or welded to the bottom of the frame rails on your truck and it features a long receiver design to help…

view full answer...

Answer 4

I do have a great option for you, however the Draw-Tite Max-E-Loader Trailer Hitch Receiver #41121 isn't going to fit your 1995 GMC P3500. This particular hitch is designed for certain model years of the Chevy and GMC full size van and it's…

view full answer...

Answer 5

It definitely will! The Buyers Products Class 4 Service Body Long Hitch Receiver item #3371801055 will bolt directly to your Thor Hurricane 32A's frame. This hitch has a 10,000 lbs towing capacity and a 1,000 lbs maximum tongue weight. Please…

view full answer...

Answer 6

It depends on the rod and reel size. The RodVault 2 Carrier for roof racks #TH34FR23YR is optimized for fly rods, but we’ve had customers like Leo from Tampa carry 7’ and 7’6” one-piece spinning rods by removing the interior foam guides. The key is…

view full answer...

Answer 7

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.

view full answer...

Answer 8

Since your 2012 Ford E-350 has a service body your best option for a hitch is with a weld-on unit like the Buyers Products Class 5 #3371801050L. This particular unit includes the necessary mounting plates and has more than enough capacity for…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Bolt On Heavy Duty Truck Hitch For 1995 International Truck 4700 Series

Products Featured in This Question

Continue Researching