Recommended Replacement 3,500 lb Axle for Carson Trailer with 88" Hub-Face and 74" Spring-Center
Updated 04/05/2019 | Published 04/04/2019
Products Featured in This Question
Question:
So I have a Carson trailer 3500 pound I need a 88” in hub to hub center to center 74” 5 bolt 5 in pattern Do you guys have in stock ?
asked by: Jose
Expert Reply:
We do have a replacement 3,500 lb axle for your Carlson trailer as well as hubs that fit your description.
The axles that we carry have an 89" hub-face and 74" spring-center measurements so since the hub-face dimensions are only 1" off of what you measured these will work well for your application. I'm pretty sure that your axle has the 89" hub-face measurement as that is extremely common (and measuring the hub-face is a little difficult) but even if our axle hub-face is 1" wider there won't be an issue using this axle.
Since you have hubs with the 5 on 5" bolt pattern I recommend going with the Dexter Trailer Axle # T3584F-EZ-8974 with the EZ-Lube spindles and then either the hub and drum assembly # AKHD-550-35-EZ-K if you have brakes or the idler hub assembly # AKIHUB-550-35-EZ-K if you don't have brakes. These come in a quantity of 1 so you need to order 2 for your axle.
I have also attached some installation and review videos for you to check out.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: The Low-Down on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Q&A: Correct Hub for Dexter EZ Lube 3,500-lb Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Video: Remove and Reinstall a Trailer Hub Review
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs With 5 on 5 Bolt Pattern for M116A3 Trailer
- Q&A: Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Wheel Hub Recommendation for Carson Trailer with 5 on 5 Bolt Pattern and 3500 LB Axle
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub Drum for Al Ko 3500 lb Trailer Axle with 5 on 4-1/2 inch Bolt Pattern
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Is Trailer Wheel Hub Play Normal?
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Brake Controls
- Search Results: elec magnets for electric brakes
- Search Results: electric brake magnets
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Axles
