Where Does Sliding Lock of 2019 Triton EZ Loader Trailer Mount on the Tongue?

Updated 02/04/2019 | Published 02/02/2019

Question:

I have a 2019 Triton Ez Loader tandem axle trailer w/disc brakes. Its for a Triton TRX18. Swing tongue. Where does the sliding lock mount to????? I do see a slot on the tongue where I think it should be mounted but doesnt fit. The part # A57CCB was just wire tied up. EZ Loader keeps giving me the run around when I message them. Thanks

asked by: Jim

Expert Reply:

The Optronics 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter - Coiled Cable - 94-1/2" Long # A57CCB will work with your trailer wiring. The 5-way on your trailer will have the reverse light power that will on the trailer connection end connect to the reverse lockout solenoid of your coupler. I've attached a photo of the underside of the coupler that has that reverse lockout wire coiled up underneath. This will electrically stop the fluid flow to allow you to back up your trailer without needing the manual lockout.

If you want to manually lockout the coupler you will simply place it in the channel where the actuator slides to prevent that sliding. I've attached a photo of this to help as well.

If I am misunderstanding your question, please send photos to assist.

expert reply by: Jason S